A series of Robot Kits for a future engineer. Assemble this kit and discover how much fun electronics, mechanics and hydraulics can be! Tobbie II - The most fun and smart robot friend ever.

Tobbie II is a construction robot, designed with 6 legs and a rotation-free body, having all the necessary electronic components, including motor, IR sensor and torch horn.

This Starter Kit is especially made for those who are learning the programming and electrical circuit. The Kit contains basic electrical components such as LEDs, buttons, buzzer, heat sensor, steering motor and so on.

The ElecFreaks Kit Basic Micro:Bit is a Basic Level Kit. The 5 most common Electrical Modules, which can be easily connected to the Micro:Bit via Basic:Bit. This kit can help students learn how to quickly build their Micro:Bit projects. These Modules can be directly triggered by Makecode. No need to add any extra packages. It is helpful for students to understand the use of these electrical modules from their principle.

The 8 Environment Sensors Kit, M5Stack Env Kit, includes the 8 Earth, Angle, Pir, Hub, Light, Rgb, Ir and Env Sensors.

JoyC is a Joystick Module designed for the M5StickC. Supports two-handed operation. The main control chip is STM32F030F4, it uses the I2C communication protocol and the M5StickC host for data transmission. The joystick range is from 0 to 200, includes 12 RGB LEDs, and the bottom of the joystick contains 16340 battery holder.

The IoT Kit Smart Science Micro:Bit is based on IoT:Bit, a new breakout board that includes a RTC Timing and WIFI Module compatible with Scientific Sensors such as Sound Sensor, Dust Sensor, Light Sensor and Level Sensor of Water. You can collect data through the Sensors and send data to the Cloudwith a more stable and accurate Data Analysis. This Kit includes everything you need to collect Sensor Data and create your own IoT Projects!

The IoT Gravity for Micro: Bit Starter Kit is a complete micro-bit starter kit that quickly experiments and develops designs.

This IO Extender is an easy-to-use, low-cost Board Expansion for micro:bit. It drives all micro:bit IO ports and has a specially designed port for “HuskyLens AI Camera”. This board can be used to provide a stable 5V power supply for the HuskyLens to make it work steadily in all modes.

IR is an Infrared Photoelectric Sensor. The infrared remote control is widely used in consumer electronics; it can be used to operate devices such as televisions, DVD players or other household appliances within a short distance. Since this unit comes with a transmitter and receiver, you can practice not only IR encoding, but also IR decoding.

The Joystick is very similar to the 'analog' joystick on PS2 controllers (PlayStation 2). The X and Y axes are two 10k potentiometers that control 2D movement, generating analog signals. The joystick also has a button that can be used for special applications, so the entire unit can emit X-Y movement signals in both directions and in the Z direction.

This unit communicates with the MSCore via the GROVE A interface. The I2C address is 0x52, Reading the data transferred from the Joystick, you can obtain the movement information from the Joystick.

The Hub is one of the six units of the M5GO, which can be purchased separately. This unit is used as a Grove door expander.

Attention: The Hub is just a physical expander, if you are looking for a software expander (standard protocol) like I2C, single bus, check PaHUB or PbHUB. If you connected two I2C slave devices to the HUB that share the same address, you will have problems getting I2C data from both.

Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your idea buds.
This Grove - Starter Kit for Arduino is upgraded version of our Grove Starter Kit plus. We included more frequently encountered modules in this kit to support your concept buildup.Optimize the internal slot structure, using technology to make our products inside plastic boxes more regularized, more protective.

The GeekServo Motor 9g Compatible with Lego contains protection against any excessive force with the "Jumping Over Teeth" protection. Can be Programmed by MakecodeN, JavaScript, microPythonN and C ++. The Engine is Compatible with Lego Accessories for many projects to be created!

The GeekServo Motor 9g 270 Degrees Compatible with Lego is composed of a DC Motor and Feedback Control Loop and generally PWM Controlled. There are basically 2 Types on the Market: The Limited Rotation Servo (Angle Control Focus) and Continuous Rotation Servo (Speed Control Focus).

Finger is a fingerprint sensor that makes fingerprint verification super simple.

The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.

This unit communicates with the M5Core by UART protocol connected via PORTC.

The Experimental Box for Micro:Bit is a Multifunctional Box based on Experimental Professional equipment. This box is a new teaching aid developed by Elecfreaks.

Expansion board For Micro:BIT.

This ESP8285 ESP M2 Module provides easy-to-use WiFi for any UART port and is compatible with the HC-06 Bluetooth modules. If your project uses Bluetooth, it is very easy to convert it to WiFi. Using the integrated web interface, WIFI-UART communication can be configured for TCP or UDP sockets on any port.

NodeMcu consists of open source firmware and a development kit that helps to prototype your IoT (Intemet of Things) project through some lines of Lua language. The NodeMcu has integrated ESP-12 serial WiFi with GPIO, PWM, ADC, I2C and 1-WIRE capabilities, integrates USB-TTL serial with super reliable industrial strength CH340 for superior stability on all supported platforms.

The ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps.

This board is the combination of 3 extremely interesting products: a ESP32 Module with WiFi and Bluetooth, a oLED Display and a battery charging and charging system Lithium-Ion 18650.

The ESP32-CAM is a WIFI + Bluetooth Development Card based on the ESP32 Chip, with the additional possibility of using a camera. It is ideal for a variety of loT applications.

A ESP32 NodeMcu WiFi CP2102 Module with Built-in Antenna, MicroUSB Connector, Bluetooth BLE 4.2, Analog Digital Converter, GPIO with PWM Functions, 12C, SPI, Etc and Supports Remote Firmware Upgrade.

This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.

The WT32-SC01 is a Board from Development based on the ESP32 with 3.5 touch screen inches (320x480 pixels), in color, which was recently launched by Wireless-Tag Technology Co. Ltd.

This Educational Robot Kit Micro: Maqueen for Micro: Bit is a graphical programming robot for STEM education, which inherits micro-bit gameplay and simple operation. Mini-body, cool features and plug-and-play allow children to quickly learn visual programming in entertainment, showing children's interest in science and logical reasoning.

This module has two buttons of different colors. They share exactly the same mechanism, the status of the button can be detected by the status of the input pin, just capture the high / low electrical level.

This unit communicates with the M5Core through the Grove B port.