In/Out Shield for your Arduino, Velleman.

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this.

This is the FeatherWing Adalogger: it adds a real-time clock with battery and micro SD card storage to any Feather mainboard. Using the Headers, you can connect a FeatherWing to the top of your board and let the board fly!

The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

Special for garden lighting, this Transmitter and Receiver Kit with 2 Channels allows you to switch the lighting of your Garden in 2 different zones with the commands on and off.

The Module KA2284 is a Battery, Power and Audio Level Indicator.

ITDB031 is a serial port BLE Module. It is based on TI's CC2541 BLE chip. With it, you can transfer data wirelessly and do remote control. It supports central and peripheral modes. And it supports remote control for the other side that is connected. You can also support custom commands when you combine it with other devices. BLE Bee is compatible with XBee. You can simply connect it to XBee.

Note: The serial interface is 3.3V, not the typical 5V, as with many Arduino boards.