Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
This site uses cookies to improve your experience. By navigating this site, you consent to the use of cookies. Learn more about our cookies. |
|
Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
50:1 Metal Gearmotor 37Dx70L mm with 64 CPR Encoder
Motor DC 6V DC 250MA 14500RPM 2,5 ~ 6V DC
Micro Metal Gearmotor 0.9A - 50:1
JST RCY Plug with 10cm Leads, Female
This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the inserted BBC micro:bit.
The motor shield is based on the L298 , it is a double complete bridge driver designed to drive inductive loads, such as relays, solenoids, DC and stepper motors.
This is a DC motor with and metal gear with encoder . It is a 6V engine with a 20: 1 metal gearbox and an integrated quadrature encoder that offers a resolution of 11 counts per revolution.
This module is based on the popular L298N H Bridge DC Motor Driver . The circuit will allow you to easily and independently control two motors up to 2A each in both directions.
These engines are moto-reducers are the same ones used in the Magician Chassis and Kit Redbot and offer a cheap and easy to use configuration to get your wheels spinning. Because these gear motors are at a right angle, you will also be able to monitor and control your wheel rotation!
Full size 2 wheels package with rubber base - 125 mm in diameter and 60 mm wide .
The metal turbo gear worm engine uses a metal gearbox for durability and a high torque output. Due to the special mechanical structure of the auger, the motor output shaft is self-locking and cannot be rotated.
The metal turbo gear worm engine uses a metal gearbox for durability and a high torque output. Due to the special mechanical structure of the auger, the motor output shaft is self-locking and cannot be rotated.
This is a metal-encoded DC geared motor r. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per rotation of the motor shaft, which corresponds to 341.2 rotation counts of the gearbox output shaft.
This is a metal-encoded DC geared motor r. It is a 6V motor with a 75: 1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per rotation of the motor shaft, which corresponds to 823.1 counts per rotation from the gearbox output shaft.
This DC motor driver can be used on 4WD mobile robot platforms, combat robots, smart car competition, drive pumps, electric fans, transporters, etc ...
This Small DC 12V DC Motor is Perfect for Small Robotic Projects!
The Micro Solar series allows solar and electronics to be available to everyone and so you can create your own solar systems!
The Micro Solar series allows solar and electronics to be available to everyone and so you can create your own solar systems!
High Reversibility Motors with 6V/12V/24V.
High Reversibility Motors with 6V/12V/24V.
High Reversibility Motors with 6V/12V/24V.
65mm Blue Wheel with Plastic Tire and 3-6V DC Motor, great for robotic applications and Line Follower Robot creations.
65mm Orange Wheel with Plastic Tire and 3-6V DC Motor, great for robotic applications and Line Follower Robot creations.
This small DC 12V DC Motor is perfect for small robotic projects!
This module integrates a soft silicone fan, ideal for robotic projects with Arduino.