Mini IoT Development Kit M5StickC Esp32-Pico - M5Stack
The M5Stick-C is an ESP5 powered M5Stack mini. It's a portable, easy-to-use, open source IoT development board.
(SEM IVA 213.58€)
local_shippingPORTES DE ENVIO GRÁTIS
This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.
This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.
Specifications:
• Fully Compatible with the Stackable and Extensible M5Stack System;
• Protoboard, Extension M5S-BUS;
• Each Module comes with an Individual Switch,
• Set of Environmental Sensors (Temperature, Humility, Barometric Pressure, Light Intensity and Microphone);
• Joystick controller;
• 8 Relay Outputs;
• 4x DAC, 4x ADC;
• 4x4 Button Matrix;
• 8x8 RGB LED matrix;
• Encoder;
• 1x Servo;
• DC motor (with feedback encoder);
• Step Motor with Three-Phase Five Wires;
• Radio Frequency Identification Reader;
• RS-458, RS232 Series communication.
Scheme: M5IoT-Kit
Arduino IDE
• Joystick;
• DHT12+BMP280;
• Light;
• Relay;
• Microphone;
• Servo;
• DC-Motor;
• RFID.
Includes:
• 1x Demo Board Learning Board;
• 1x Feeder;
• 1x RS232 Cable;
• 1x RFID card;
• 1x Identification Card;
• 16x Breadboard Cables.
The 8 Environment Sensors Kit, M5Stack Env Kit, includes the 8 Earth, Angle, Pir, Hub, Light, Rgb, Ir and Env Sensors.
Hat SPK is an M5StickC compatible Loudspeaker with integrated PAM8303 Amplifier (Single Channel 3W Type D Power Amplifier), with a High PSRR that eliminates noise and RF interference.
Finger is a fingerprint sensor that makes fingerprint verification super simple.
The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.
This unit communicates with the M5Core by UART protocol connected via PORTC.
The MFRC522 operates in the frequency range of 13.56 MHz and uses the principle of modulation and demodulation to interact with the RF proximity card. This unit can perform the function of the card reading and writing device, to identify and record various information on the card, to encode and authorize an RF card.