The Wukong Board with Lego Support for Micro:Bit is an Integrated Breakout Board with Multiple Functions based on Micro: Bit, which has a Size Similar to Micro: Bit with Buzzer, Servo and Motor Drivers. The board is designed to adapt perfectly to Lego. It takes 20 minutes to complete the upload.

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Micro:Bit Wonder Building Kit focuses on brick expansions with 20 designs available, and youcan build more designs. Equipped with several electronic sensors, such as the Line-Following Sensor, the Sonar:Bit and the Water Level Sensor, which enrich projects with more challenges and fun.

Wixel Programmable USB Wireless Module

A Module with GPRS Antenna, operation Wireless and SIM Card.

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development boards like our very own SparkFun ESP8266 

The Iot:Bit is a Board from Expansion based on IoT for Micro:Bit. It uses the ESP8266 as a Board of WiFi Expansion and serial port to communicate with the Micro:Bit. It also extended all available IO Ports of Micro:Bit which is led by GVS and can extend various 3V E-Blocks like LED, Photosensitive and Servo by using it. At the same time, the Iot:Bit with a built-in buzzer for external sound and a built-in RTC clock for timing without power supply. Let's create your own IoT by MakeCode!

The SparkFun weather:bit  is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station.

TPS2113A Power Multiplexer Carrier with USB Micro-B Connector

The TPBot has the appearance of a toy and works as one, since it can be used very easily to follow lines, avoid obstacles or let it work alone (in entertainment mode). However, once the Micro: Bit is inserted, it becomes a super-complete and fully programmable smart car. It's great for working in a classroom, you can expand it with extra electronic modules and add Lego pieces.

A Support known for compatibility with Micro:Bit, with Switch and Terminal, for AAA Batteries.

This is a Speaker Expansion Module designed for the BBC micro:bit.

The Earth Unit is a Sensor for measuring Humidity in Soil or Similar Materials. The Soil Moisture Sensor is quite simple to use. The two large stake-type sensors act as probes for the sensor, acting together as a variable resistance. The higher the moisture in the soil, the better the conductivity between the two, so that the sensor results in less resistance and higher GIS output.

You can read the moisture in the soil through ADC. Within this unit, there is an extra potentiometer to change the measurement range.

The Smart Health Kit has the Sensor:Bit, Analog UV Sensor, PIR Sensor, MQ3 Alcohol Sensor, Servo and Etc, we can use it to develop projects such as UV Light Detection, a Posture Change Reminder, Alcohol Detector and much more, with which we can learn to program and maintain healthy lifestyle habits in a scientific way!

The Smart City Kit has the IoT:Bit, DHT11 Sensor, Soil Moisture Sensor, Water Level Sensor, Sonar:Bit, Servos and Etc, we can use it to build topics like smart parking, transport network and river level monitoring, we can use it to learn more about IoT!

The Smart Agriculture Kit has IoT:bit, DS18B20 Temperature Sensor, Soil Moisture Sensor, Water Level Sensor, PIR Sensor, Servos and Etc, we can use it for build projects such as a smart insect repellent, an ecological greenhouse, an aquarium water level monitoring device and much more, from which we can learn about modern agriculture, program and explore more possibilities to apply technology in agriculture!

Sensor:bit is a breakout board for Micro:Bit. The card increases the available I/O ports on Micro:Bit and transforms them into GVS. With this board, we can use various 3V modules like LED light, photocell, etc. The board has integrated a buzzer and an audio connector, which allows us to listen to music from the buzzer or with our headphones.

Seeeduino XIAO carries the powerful CPU-ARMG; Cortex & -MO (SAMD21G18), which is a low power Arduino Microcontroller, on the other hand, this small board has a good processing performance, and needs less energy. In addition to the powerful CPU, the Seeeduino XIAO excels in many other functions. It has 14 GPIO PINs, which can be used for 11 analog PINs, 11 digital PINs, 1 I2C interface, 1 UART interface and 1 SPI interface.

This Robot Kit does not need welds or cables to mount it, you will only need one screw.
Bit:Bot can be used by children and adults and this Kit allows you to explore and encode Micro:Bit using one of the available languages (all features are not supported in all languages).

The Ring:Bit Pack contains 200 LEGO compatible parts and the necessary electronics to assemble and program 6 different projects with Micro:Bit and Microsoft MakeCode.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The MFRC522 operates in the frequency range of 13.56 MHz and uses the principle of modulation and demodulation to interact with the RF proximity card. This unit can perform the function of the card reading and writing device, to identify and record various information on the card, to encode and authorize an RF card.

Joystick: Bit V2 is a Joystick based on Micro: Bit . Contains a 4-Way Joystick and 4 Undefined Buttons. Improves the Game Experience with its Integrated Buzzer and Vibration Engine. Joystick: Bit V2 can also be used as a Remote Control with a Good Look and Comfortable Feel.

RedBear DUO - Wi-Fi BLE IoT Board

The RoverC is a programmable omnidirectional mobile robot base compatible with the M5StickC and can be started with the insertion of the M5StickC. The main controller of the base is the microcontroller stm32f030f4. The base comes with N20 worm gear motors, which are directly driven by a four-channel motor driver. These motors are connected to the mechanum wheels, which can move in all directions. In addition, two Grove-compatible I2C ports are provided to facilitate expansion to other modules.

PuppyC is a programmable four-legged robot base compatible with the M5StickC. It contains the STM32F030F4 Microcontroller, four 5G90 micro servos, a battery holder and an independent switch. The PuppyC base needs to be used in conjunction with the M5StickC controller. After programming StickC, it communicates with PuppyC through the I2C protocol to control the steering movement.