Assemble the MK197 to create an original flashing LED Ball . Use your imagination and customize it to fit your special decor, be it Christmas or Halloween!

This package includes a Sensor of Level of Water and a Sensor of Humidity from Solo. If the plates have water covering the sensor components, an analog value will be available on the "SIG" connection. The Sensor of Level of Water can detect up to 4cm of water. This way, you can check if your aquarium, or your pet's water bowl, still has enough water. You can use the Sensor of Moisture of the Soil to check your plant's soil or growing environment, for example.

The 2WD mobile platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller . The robot comes as a kit that includes two drive motors, wheels (and rear caster), frame and all mounting hardware . The main structure and mechanical parts of a robot.

The metal turbo gear worm engine uses a metal gearbox for durability and a high torque output. Due to the special mechanical structure of the auger, the motor output shaft is self-locking and cannot be rotated.

The Motor Driver Motor:Bit to Micro:Bit is compatible with the Micro:Bit and can activate the 2 Channel DC Motor at the same time. Its biggest feature is that we can perform the Motor Direction Control of a Channel with only one IO Port, which reduces the number of IO Ports used.

When you start the 2-channel motor, it is not possible to connect connectors such as LED matrix, IIC, SPI, etc. In addition, it can drive partial IO ports with GVS format. It is a Good Companion for DIY Smart Cars.

The Wukong Board with Lego Support for Micro:Bit is an Integrated Breakout Board with Multiple Functions based on Micro: Bit, which has a Size Similar to Micro: Bit with Buzzer, Servo and Motor Drivers. The board is designed to adapt perfectly to Lego. It takes 20 minutes to complete the upload.

The Micro:Bit Adapter for Breadboard is based on Micro:Bit and can be connected directly to a Breadboard. Through this adapter, you can start several DIY creations. It is only compatible with the Micro:Bit.

The GeekServo Motor 9g 270 Degrees Compatible with Lego is composed of a DC Motor and Feedback Control Loop and generally PWM Controlled. There are basically 2 Types on the Market: The Limited Rotation Servo (Angle Control Focus) and Continuous Rotation Servo (Speed Control Focus).

The GeekServo Motor 9g Compatible with Lego contains protection against any excessive force with the "Jumping Over Teeth" protection. Can be Programmed by MakecodeN, JavaScript, microPythonN and C ++. The Engine is Compatible with Lego Accessories for many projects to be created!

The GeekServo Motor 9g 360 Degrees Compatible with Lego is composed of a DC Motor and Feedback Control Loop and generally PWM Controlled. There are basically 2 Types on the Market: The Limited Rotation Servo (Angle Control Focus) and Continuous Rotation Servo (Speed Control Focus).

The EF90D 360 Degree Servo Motor with Wheel and Tire is a kind of 360 Degree Analog Servo. It is Light and Portable, slightly larger than a 5 Cent Coin. It works with 3V voltage and it is possible to adjust the rotation speed of the servo, which can also be used to make small Robot Modules, Mechanical Arm Modules and Smart Car Modules.

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Ring:Bit Pack contains 200 LEGO compatible parts and the necessary electronics to assemble and program 6 different projects with Micro:Bit and Microsoft MakeCode.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

Plenty of buttons! In various sizes, colors and formats, what more can you want in life?

Create your own dupont yarns with this set! Choose between 1, 2, 3 2x2, 2x3 or 2x4 Connectors and make the cables work.

The Vmp501 Kit includes lots of material for your Raspberry Pi (Not Included) and for you to explore and create countless projects!

Note: Does not include the Raspberry Pi!

The Vma449 integrates the Voice Recorder ISD1820 and Playback CI to record a single message up to 20 seconds long. The recorded message is stored in the analog flash memory that keeps the message stored even in the event of a power failure. The module has an integrated microphone to record your message and buttons for recording, partial playback or full reproduction of the message functions.

The Vma210 Expansion Board is designed to allow easy access to the interface pins of an Arduino Nano. Each DIO pin or analog pin on the Nano is brought to an appropriate header.

With the Science4you Invention Factory, children will be able to become inventors and recreate extraordinary experiences of famous scientists! The Science4you Factory of Inventions Kit is a toy for those over 8 years old and allows you to recreate experiences based on discoveries by famous scientists. There are 26 experiences, 41 contents and 2 educational books to discover!

Science4you launches a new line of robots, including WatchBOT! This magnificent robot will teach you everything about the world of programming, which is the coding of the different devices. With 35 different pieces and a whole science behind its assembly, WatchBOT is very good for observing everything about one of the most detailed sciences that exists.

All Science4you products are safe and tested in specialized laboratories.

Get on the more magnetic side of science with Science4you's Magnetic Factory. With this incredible scientific toy you will be able to make 25 super fun and educational experiments. Find out how to build a compass, create a magnetic monster handle and much more. Challenge your friends to a magnetic race and have fun learning!

Find out how to make perfumes step by step to offer for both boy and girl! In addition to colorful and perfumed bath salts, the educational manual included in the Perfume Factory also teaches you how to make fun scented paintings, making these perfumes step by step. Don't miss the opportunity to learn more with this extremely fragrant toy!

All Science4you products are safe and tested in specialized laboratories.

Immerse yourself in the amazing World of Dinosaurs with the Dinosaur Extinction toy from Science4you! Find out what our planet was like when the dinosaurs went extinct and recreate the volcanic eruptions that contributed to its extinction with this scientific toy! Have fun learning with Science4you!

Become a fantastic scientist with Science4you Explosive Science - Kaboom. Have fun with this amazing scientific toy and learn how to make amazing explosions. With simple ingredients you can perform 12 super explosive educational experiments. Get ready to stand up straight!

Simulating burps, puns and vomiting can seem like a super disgusting activity... But with Science4you new scientific toy it's super fun! Yucky Science is a kit that combines knowledge of science with fun. You will learn how the human body works and understand how its most disgusting phenomena occur. Have fun learning!