BugC is a programmable robot base compatible with the M5StickC. It has four DC motors, two RGB LEDs, battery holder and a switch. The BugC base must be used in conjunction with the M5StickC controller. The base comes with a STM32F030F4 Microcontroller, which controls all motors and LEDs, and is controlled by the I2C protocol by M5StickC, which is on top of the base.

Power:Bit is an expansion card of Micro: Bit of reduced size. It is powered by 2 CR2025 button batteries and has a buzzer.

PICAXE 18M2 18 pin microcontroller

PICAXE 14M2 14 pin microcontroller

PCB connector for Microbit

Based on Planet X sensors, the Nezha Inventor Kit is designed for the BBC Micro:Bit. It contains various sensors, ultrasonic sensor, collision sensor, line tracking sensor, etc., as well as more than 400 assembly parts. Make every child an inventor with the Nezha Inventor Kit!

The Motor Driver Motor:Bit to Micro:Bit is compatible with the Micro:Bit and can activate the 2 Channel DC Motor at the same time. Its biggest feature is that we can perform the Motor Direction Control of a Channel with only one IO Port, which reduces the number of IO Ports used.

When you start the 2-channel motor, it is not possible to connect connectors such as LED matrix, IIC, SPI, etc. In addition, it can drive partial IO ports with GVS format. It is a Good Companion for DIY Smart Cars.

Arduino Development Board Module ESP8266 with WiFi OLED.

Relay, as its name implies, implements a relay function. The relay can be used as a switch operated electrically through the coil to mechanically operate a switch, where it is sometimes necessary to control a circuit of another voltage and current load through a separate low power signal, such as a digital signal emitted by a mircoprocessor. Up to 30V DC and 220V AC.

The M5Stick-C is a Mini M5Stack, powered by ESP32, It is a portable IoT development board, easy to use and open source.

What can this do? This small block is able to realize your idea, illuminate your creativity and help with the prototyping of the IoT in a very short time. This takes away many of the pains of the development process.

The M5Stick-C is an ESP5 powered M5Stack mini. It's a portable, easy-to-use, open source IoT development board.

The MAX30100 is a complete solution of Pulse Oximetry System and Heart Rate Sensor. The MAX30100 provides a very small solution without sacrificing optical or electrical performance.

This module integrates a Zhongke Weibeidou AT6558 navigation chip and a MAX2659 amplification chip used to amplify the antenna signal. The AT6558 has high performance, supports many types of satellite navigation system, capable of receiving satellite signals on 56 GNSS signal channels from 6 satellite navigation systems, joint location, navigation, weather and more. The module is able to obtain accurate information of global location, fast and precise positioning for any place.

The module can be widely used in vehicle monitoring, car navigation, on-board navigation, notebook navigation, etc. You can connect it to Port C on the M5core via the Grove cable, which is a standard UART interface.

This module is designed with an N20 Engine and includes small propellers. This N20 motor has a supply voltage of 5V. And it has a rotation speed of 8800RPM.

The Micro:Bit Adapter for Breadboard is based on Micro:Bit and can be connected directly to a Breadboard. Through this adapter, you can start several DIY creations. It is only compatible with the Micro:Bit.

A Matte Blue Case in ABS to protect your Micro:Bit V2.

This is a wireless communication module, integrated with the M8321 NB-IoT module, which provides TD-LTE / FDD-LTE / WCDMA / TD-SCDMA / GSM / GPRS / EDGE frequency band and LCC + LGA package type. It integrated abundant Internet protocols, standard field interface and functions, supported WindowsXP, Windows7, Windows8, Windows10, Linux and Android USB driver.

In the layout of the LTE-4G module, more hardware resources were added, reserved lanes for speakers, 3 LEDs, USB interface, double antenna allowed.

Hat SPK is an M5StickC compatible Loudspeaker with integrated PAM8303 Amplifier (Single Channel 3W Type D Power Amplifier), with a High PSRR that eliminates noise and RF interference.

Make a small Video Display with this Bicolor 8x8 LED Matrix. At just 1.2" on a side, it's pretty visible, but not enough to not plug into a breadboard! Each grid has two LEDs inside so it can display red, green, yellow, or multiplexed. This Matrix is bright, Beautiful and modern with beautiful diffused square lens for a stunning look. There are 24 pins on the side, 12 on each, with 0.1" spacing so you can easily connect it to a breadboard with a line on each side for wiring above.

The Kit Tinker Micro:Bit with Micro:Bit Board is a set of Micro:Bit accessories that allows you to easily connect all kinds of modules. Can be used for teaching in a classroom. And for DIY beginners, provides several sources to make your electronic designs and ideas practical. This kit includes 10 modules. You can use it to create or complete multiple projects.

The Kit Smart Home Micro:Bit is a product based on a Smart Home Micro:Bit design with components such as the TMP36 Temperature Sensor, the Sound Sensor, the Collision Sensor or even the Servomotor.