Mini IoT Development Kit M5StickC Esp32-Pico - M5Stack
The M5Stick-C is an ESP5 powered M5Stack mini. It's a portable, easy-to-use, open source IoT development board.
(SEM IVA 15.71€)
This module integrates a Zhongke Weibeidou AT6558 navigation chip and a MAX2659 amplification chip used to amplify the antenna signal. The AT6558 has high performance, supports many types of satellite navigation system, capable of receiving satellite signals on 56 GNSS signal channels from 6 satellite navigation systems, joint location, navigation, weather and more. The module is able to obtain accurate information of global location, fast and precise positioning for any place.
The module can be widely used in vehicle monitoring, car navigation, on-board navigation, notebook navigation, etc. You can connect it to Port C on the M5core via the Grove cable, which is a standard UART interface.
This module integrates a Zhongke Weibeidou AT6558 navigation chip and a MAX2659 amplification chip used to amplify the antenna signal. The AT6558 has high performance, supports many types of satellite navigation system, capable of receiving satellite signals on 56 GNSS signal channels from 6 satellite navigation systems, joint location, navigation, weather and more. The module is able to obtain accurate information of global location, fast and precise positioning for any place.
The module can be widely used in vehicle monitoring, car navigation, on-board navigation, notebook navigation, etc. You can connect it to Port C on the M5core via the Grove cable, which is a standard UART interface.
UART settings:
• Baudrate (Default: 9600bps);
• Initial Bits (1 Bit);
• Stop Bits (1 Bit);
• Parity (No).
Characteristics:
• Positioning accuracy: 2.5 meters (CEP50, Open Space);
• Channel: 56;
• Supports the Single System Positioning of BDS / GPS / GLONASS Satellite Navigation Systems or the Positioning of Multiple Systems in Any Combination;
• Support for D-GNSS Differential Positioning;
• Positioning update frequency: 1-10Hz;
• Maximum height: 1800m;
• Maximum speed: 515m / s;
• Maximum acceleration: <= 46;
• Operating Consumption Continued in Dual BDS / GPS Mode: <23mA (E 3.3V);
• Standby consumption: <10uUA (O 3.3V);
• Tracking: -162dBm;
• Capture: -148dBm;
• Operating temperature: -40ºC »85ºC;
• Two Lego Compatible Holes.
Kit Includes:
• 1x Mini Gps / Bds Unit (AT6558) - M5Stack Gps;
• 1x Cabo Grove.
Finger is a fingerprint sensor that makes fingerprint verification super simple.
The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.
This unit communicates with the M5Core by UART protocol connected via PORTC.
This is a wireless communication module, integrated with the M8321 NB-IoT module, which provides TD-LTE / FDD-LTE / WCDMA / TD-SCDMA / GSM / GPRS / EDGE frequency band and LCC + LGA package type. It integrated abundant Internet protocols, standard field interface and functions, supported WindowsXP, Windows7, Windows8, Windows10, Linux and Android USB driver.
In the layout of the LTE-4G module, more hardware resources were added, reserved lanes for speakers, 3 LEDs, USB interface, double antenna allowed.
Hat SPK is an M5StickC compatible Loudspeaker with integrated PAM8303 Amplifier (Single Channel 3W Type D Power Amplifier), with a High PSRR that eliminates noise and RF interference.
This module is designed with an N20 Engine and includes small propellers. This N20 motor has a supply voltage of 5V. And it has a rotation speed of 8800RPM.