Mini IoT Development Kit M5StickC Esp32-Pico - M5Stack
The M5Stick-C is an ESP5 powered M5Stack mini. It's a portable, easy-to-use, open source IoT development board.
(SEM IVA 23.87€)
The M5Stick-C is a Mini M5Stack, powered by ESP32, It is a portable IoT development board, easy to use and open source.
What can this do? This small block is able to realize your idea, illuminate your creativity and help with the prototyping of the IoT in a very short time. This takes away many of the pains of the development process.
The M5Stick-C is a Mini M5Stack, powered by ESP32, It is a portable IoT development board, easy to use and open source.
What can this do? This small block is able to realize your idea, illuminate your creativity and help with the prototyping of the IoT in a very short time. This takes away many of the pains of the development process.
The M5stickC is one of the main devices in the MSStack product series, built on a growing hardware and software ecosystem. It has many compatible modules and units, as well as the open source and engineering community that will help you maximize your benefit at all stages of the development process.
Characteristics:
• 5V DC power supply;
• USB Type C;
• Based on ESP32
• 4 MByte Flash + 520K RAM;
• 6-axis IMU MPU6886;
• Red LED;
• IR transmitter;
• Microphone;
• 2 Buttons, LCD (0.96 Inches), 1 Reset;
• 2.4G antenna: Proant 440;
• 80mAh Lipo battery;
• Extensible socket;
• Grove Gate;
• UIFlow Development Platform, MicroPython, Arduino;
ESP32 features:
• 240MHz Tensilica Dual Core LX6 Microcontroller with 600DMIPS;
• 520KB Integrated SRAM;
• Built-in 802.11b / g / n HT40 WiFi Wi-Fi transceiver, Base Band, Battery and LWIP;
• Integrated Dual Mode Bluetooth (Classic and BLE);
• Sensor Hall;
• 10x Capative Touch Interface;
• 32kHz Crystal Oscillator;
• PWM / Timer Input / Output Available on All GPIO Pins;
• SDIO Master / Ointment S0MHz;
• SD Card Interface Support.
Includes:
• 1x M5Stick-C;
• 1x Usb Type C cable;
• 1x Wrist Bracelet.
Block Programming with UIFlow, Documentation Available at https://docs.m5stack.com
IR is an Infrared Photoelectric Sensor. The infrared remote control is widely used in consumer electronics; it can be used to operate devices such as televisions, DVD players or other household appliances within a short distance. Since this unit comes with a transmitter and receiver, you can practice not only IR encoding, but also IR decoding.
This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.
The Joystick is very similar to the 'analog' joystick on PS2 controllers (PlayStation 2). The X and Y axes are two 10k potentiometers that control 2D movement, generating analog signals. The joystick also has a button that can be used for special applications, so the entire unit can emit X-Y movement signals in both directions and in the Z direction.
This unit communicates with the MSCore via the GROVE A interface. The I2C address is 0x52, Reading the data transferred from the Joystick, you can obtain the movement information from the Joystick.
Color is a Light to Digital Color Converter with IR Filter. The TCS3472 Device provides a digital red, green, blue (RGB) return and sharp light detection values. An infrared blocking filter, integrated in the chip and located in the color-sensing photodiodes, minimizes the infrared spectral component of the received light and allows color measurements to be made accurately.
This unit communicates with the M5Core through the Grove (I2C) port. The address is 0x29.