With this GSM Module, you can control devices by sending SMS messages. It is controlled via AT commands and can be integrated with your Arduino projects. Designed for the global market, modules based on the SIM900A feature the GSM/GPRS bands of EGSM 900MHZ and DCs 1800MHz.

A Module with GPRS Antenna, operation Wireless and SIM Card.

Remote Control Compatible Garage 4 Channels Rolling Code (Water Resistant)

Replace all your Command Confusion with the Broadlink RM Mini 3 Universal Smart Home Wifi IR Remote Control with App and Professional Support, Compatible with Scene and Suspend Mode, Exceptional Hardware Configuration and Time function.

SparkFun Venus GPS c SMA connector

2.4GHz SMA - 3dBi antenna

Placa WiFi RedBearLab CC3200

Grove - GPS

SIM800H GPRS Shield

3dBi GPS antenna SMA connector

SparkFun Infrared Control Kit

Adafruit FONA - Mini Cellular GSM Breakout - SMA Version - v1

SparkFun RFM69 Breakout 915MHz

XBee 6.3mW Wire Antenna - Series 2C ZigBee Mesh

IComsat is a GSM/GPRS shield for Arduino and based on the SIM900 Quad-band GSM/GPRS module. It is controlled via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands), and fully compatible with Arduino / Iteaduino and Mega.

This board based on the latest SIMCOM SIM808 GSM/GPS module, it offers cellular GSM and GPRS data along with GPS technology for satellite navigation.

O GP-735 é um receptor de antena inteligente GPS simplista, de alto desempenho e fácil de usar. Com sensibilidade de rastreamento de -162dBm e apenas 29 segundos de tempo de início após uma longa paragem, o GP735 é uma peça de tecnologia minúscula, porém poderosa. O design fino torna ideal para aplicações onde você não tem muito espaço para trabalhar.

O SM5100B é um módulo GSM miniatura, quad-band 850 / EGSM 900 / DCS 1800 / PCS 1900, que pode ser integrado num grande número de projetos sem fios. Você pode usar este módulo para realizar quase qualquer coisa que um telemóvel normal pode - mensagens de texto SMS, GSM / GPRS, o TCP / IP, e muito mais!

O complemento Raspberry PI GSM V1.0 é personalizado para a interface Raspberry Pi baseada no módulo SIM900 quad-band GSM / GPRS.

These wireless receivers work with our 434MHz transmitters. They can easily fit on a breadboard and work well with microcontrollers to create a very simple wireless data connection. Since these are just the receivers, they will only work one way data communication, you would need two pairs to act as a transmitter / receiver pair.

Kit 2 receiver transmitters 3 channels 433mhz with 2 commands from Orno.

2.4 GHz 3dBi foldable antenna with reverse bias - SMA RF connector. Perfect for prototyping with RF ICs and Xbee modules. 50 ohm impedance. 10.16cm in length.

infrared devices are widely used and often for remotely controlled devices . With this IR receiver, your Arduino project is now able to receive commands from any IR remote controller.

At ElectroFun we have a few different GPS modules, but none that met all of our wishes - that's why we acquired this small GPS card. This is the Ultimate GPS Module.

This module integrates a Zhongke Weibeidou AT6558 navigation chip and a MAX2659 amplification chip used to amplify the antenna signal. The AT6558 has high performance, supports many types of satellite navigation system, capable of receiving satellite signals on 56 GNSS signal channels from 6 satellite navigation systems, joint location, navigation, weather and more. The module is able to obtain accurate information of global location, fast and precise positioning for any place.

The module can be widely used in vehicle monitoring, car navigation, on-board navigation, notebook navigation, etc. You can connect it to Port C on the M5core via the Grove cable, which is a standard UART interface.

This is a wireless communication module, integrated with the M8321 NB-IoT module, which provides TD-LTE / FDD-LTE / WCDMA / TD-SCDMA / GSM / GPRS / EDGE frequency band and LCC + LGA package type. It integrated abundant Internet protocols, standard field interface and functions, supported WindowsXP, Windows7, Windows8, Windows10, Linux and Android USB driver.

In the layout of the LTE-4G module, more hardware resources were added, reserved lanes for speakers, 3 LEDs, USB interface, double antenna allowed.

The Car Ring: Bit is a small smart DIY car driven by the Micro: Bit of the BBC and Ring: Bit. The Ring: Bit extends the 3 GPIO ports of the Micro: Bit and allows different sensors and components to be easily connected to the Micro: Bit.

The ElecFreaks Kit Basic Micro:Bit is a Basic Level Kit. The 5 most common Electrical Modules, which can be easily connected to the Micro:Bit via Basic:Bit. This kit can help students learn how to quickly build their Micro:Bit projects. These Modules can be directly triggered by Makecode. No need to add any extra packages. It is helpful for students to understand the use of these electrical modules from their principle.