With this GSM Module, you can control devices by sending SMS messages. It is controlled via AT commands and can be integrated with your Arduino projects. Designed for the global market, modules based on the SIM900A feature the GSM/GPRS bands of EGSM 900MHZ and DCs 1800MHz.

The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

A Module with GPRS Antenna, operation Wireless and SIM Card.

SparkFun Venus GPS c SMA connector

Placa WiFi RedBearLab CC3200

Grove - GPS

SIM800H GPRS Shield

3dBi GPS antenna SMA connector

Adafruit FONA - Mini Cellular GSM Breakout - SMA Version - v1

XBee Pro 63mW PCB Antena - Series 2B (ZigBee Mesh)

IComsat is a GSM/GPRS shield for Arduino and based on the SIM900 Quad-band GSM/GPRS module. It is controlled via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands), and fully compatible with Arduino / Iteaduino and Mega.

This board based on the latest SIMCOM SIM808 GSM/GPS module, it offers cellular GSM and GPRS data along with GPS technology for satellite navigation.

O GP-735 é um receptor de antena inteligente GPS simplista, de alto desempenho e fácil de usar. Com sensibilidade de rastreamento de -162dBm e apenas 29 segundos de tempo de início após uma longa paragem, o GP735 é uma peça de tecnologia minúscula, porém poderosa. O design fino torna ideal para aplicações onde você não tem muito espaço para trabalhar.

O SM5100B é um módulo GSM miniatura, quad-band 850 / EGSM 900 / DCS 1800 / PCS 1900, que pode ser integrado num grande número de projetos sem fios. Você pode usar este módulo para realizar quase qualquer coisa que um telemóvel normal pode - mensagens de texto SMS, GSM / GPRS, o TCP / IP, e muito mais!

O complemento Raspberry PI GSM V1.0 é personalizado para a interface Raspberry Pi baseada no módulo SIM900 quad-band GSM / GPRS.

2.4 GHz 3dBi foldable antenna with reverse bias - SMA RF connector. Perfect for prototyping with RF ICs and Xbee modules. 50 ohm impedance. 10.16cm in length.

At ElectroFun we have a few different GPS modules, but none that met all of our wishes - that's why we acquired this small GPS card. This is the Ultimate GPS Module.

This is the FeatherWing Adalogger: it adds a real-time clock with battery and micro SD card storage to any Feather mainboard. Using the Headers, you can connect a FeatherWing to the top of your board and let the board fly!

This module integrates a Zhongke Weibeidou AT6558 navigation chip and a MAX2659 amplification chip used to amplify the antenna signal. The AT6558 has high performance, supports many types of satellite navigation system, capable of receiving satellite signals on 56 GNSS signal channels from 6 satellite navigation systems, joint location, navigation, weather and more. The module is able to obtain accurate information of global location, fast and precise positioning for any place.

The module can be widely used in vehicle monitoring, car navigation, on-board navigation, notebook navigation, etc. You can connect it to Port C on the M5core via the Grove cable, which is a standard UART interface.

This is a wireless communication module, integrated with the M8321 NB-IoT module, which provides TD-LTE / FDD-LTE / WCDMA / TD-SCDMA / GSM / GPRS / EDGE frequency band and LCC + LGA package type. It integrated abundant Internet protocols, standard field interface and functions, supported WindowsXP, Windows7, Windows8, Windows10, Linux and Android USB driver.

In the layout of the LTE-4G module, more hardware resources were added, reserved lanes for speakers, 3 LEDs, USB interface, double antenna allowed.

ITDB031 is a serial port BLE Module. It is based on TI's CC2541 BLE chip. With it, you can transfer data wirelessly and do remote control. It supports central and peripheral modes. And it supports remote control for the other side that is connected. You can also support custom commands when you combine it with other devices. BLE Bee is compatible with XBee. You can simply connect it to XBee.

Note: The serial interface is 3.3V, not the typical 5V, as with many Arduino boards.

Stem Shield for your Arduino, the Velleman.

When you assign a high level to the module pin, the electro magnet can suck magnetically conductive objects. Otherwise, it will release the object.

An electro magnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to the Ampere Law. To focus the magnetic field on an electro magnet, the wire is wound into a coil with many twists of wire side by side. The Magnetic Field of All Twists of the Wire passes through the Coil Center, creating a Strong Magnetic Field there.

It's Easy to Use to Learn the Electro Magnet Principle.

The Module KA2284 is a Battery, Power and Audio Level Indicator.

In/Out Shield for your Arduino, Velleman.

The Car Ring: Bit is a small smart DIY car driven by the Micro: Bit of the BBC and Ring: Bit. The Ring: Bit extends the 3 GPIO ports of the Micro: Bit and allows different sensors and components to be easily connected to the Micro: Bit.

The ElecFreaks Kit Basic Micro:Bit is a Basic Level Kit. The 5 most common Electrical Modules, which can be easily connected to the Micro:Bit via Basic:Bit. This kit can help students learn how to quickly build their Micro:Bit projects. These Modules can be directly triggered by Makecode. No need to add any extra packages. It is helpful for students to understand the use of these electrical modules from their principle.

The IoT Kit Smart Science Micro:Bit is based on IoT:Bit, a new breakout board that includes a RTC Timing and WIFI Module compatible with Scientific Sensors such as Sound Sensor, Dust Sensor, Light Sensor and Level Sensor of Water. You can collect data through the Sensors and send data to the Cloudwith a more stable and accurate Data Analysis. This Kit includes everything you need to collect Sensor Data and create your own IoT Projects!