(SEM IVA 9.94€)
This presence sensor for LED lamps allows the use for safety or convenience purposes, and may be placed away from the lamps or projectors it commands.
When motion is detected in the sensing field of the sensor, it switches on the LED bulbs or projectors that are connected to its output. In addition, it can be used to control various luminaires, provided that their technical characteristics are respected.
The passive (or pyroelectric) infrared sensor detects movement by measuring changes in the infrared (heat) level emitted by nearby bodies.
The sensor has a timing regulator, which allows you to adjust the length of time the LED lamps or lamps stay on as soon as the movement is detected. The device also has a photoelectric sensor that allows adjusting the level of brightness from which the sensor is actuated. In this way it is possible to choose, for example, that the sensor only illuminates the light when detecting the presence of a body in its radius of action at night.
Usually detects a person up to about 6 feet away. His field of vision is approximately 360 degrees.
Specifications
Voltage 220-240V AC, 50Hz
Power Consumption 0.9 W
Manufacturer Warranty 2 Years
Dimensions Φ76 x 79 mm - cut: Φ62 mm
Thermoplastic Body
Average Shelf Life (Hours) 20000
Certificates CE / EMC, RoHS.
Protection class (NP-EN 60529) IP20
Detection Distance 6m @ 24ºC
Supported Maximum Power (W) 300W (LED)
Timer (Delay) 10 sec. 15 min. (adjustable)
Installation height 2.2 - 4 mt
Passive Infrared Detector (PIR) Type
Motion detection speed 0.6 - 1.5 m / s
Detection Angle 360º
Ambient light 3 - 2,000 LUX (adjustable)
Electrical Wall Outlet with 2 USB 5V 2.1A inputs.
It is advisable to use the ventilation system sparingly, during the printing process. Do not use extrusion temperatures above 2300ºC, due to the possibility of burning the material. The values shown are typical values that may vary according to the type of 3D printer. Product made in Portugal.
A Soldering Iron with 12V and 40W with Lighter Connection.
The MKR WAN 1300 is a card that combines the functionality of MKR Zero and LoRa connectivity. It is the ideal solution for those who want to develop IoT projects with minimal prior experience in networks with a low power device.
This presence sensor for LED lamps allows the use for safety or convenience purposes, and may be placed away from the lamps or projectors it commands.
