The Pololu USB to serial adapter is great for connecting microcontroller designs to a personal computer. The adapter uses 3.3 V signal levels so you can connect it directly to any microcontroller running at up to 5 V without the hassle of an RS-232 to TTL level converter.
O sensor de fluxo de água consiste em um corpo de válvula de plástico, um rotor de água e um sensor de efeito hall. Quando a água flui através do rotor, o rotor rola.
Este módulo usa um interruptor de inclinação de mercúrio para ativar um LED. Há também uma saída digital conectada através de uma resistência de 10K embutido.
This semiconductor gas sensor detects the presence of combustible gas and smoke at concentrations from 300 to 10,000 ppm. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
The Grove – UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. This form of electromagnetic radiation has shorter wavelengths than visible radiation. It is based on the sensor GUVA-S12D.It has a wide spectral range of 200nm-400nm. The module will output electrical signal which is varied with the change of the UV intensity. UV sensors are used for determining exposure to ultraviolet radiation in laboratory or environmental settings.
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development boards like our very own SparkFun ESP8266
The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The shield also have two Grove connectors and a microSD card socket to support projects which require storing large amounts of data from Grove sensor. The RJ45 port (Where the Ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.
DS18B20 is a single-bus digital temperature sensor with features of ultra-small size, wide range of applicable voltage and measurable temperature and high resolution.
This DTMF Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With it's audio connector you can decode the crazy funny noises common phones make.
This compact carrier board makes it easy to integrate a Sharp GP2Y0A60SZLF analog distance sensor (not included) into your project by providing all of the required external components and a 0.1?-pitch, four-pin interface to the sensor. This version of the carrier board is configured for 3V mode.
The motor shield is based on the L298 , it is a double complete bridge driver designed to drive inductive loads, such as relays, solenoids, DC and stepper motors.
This relay shield is capable of controlling 4 relays . The maximum switching power can be 360VA / 90W . It can be controlled directly by the Arduino by means of digital IOs digital with external power of 9v . With integrated xbee socket and APC220 socket, it can be controlled wirelessly via Xbee / bluetooth / APC220 . Make it an ideal solution for home automation and robotics.
This is a DC-DC buck-mode power module, with input voltage range of 3V - 15V and fixed voltage / current at fixed 5V / 600mA . Working frequency can reach 0.5 MHz . The module has high conversion rate and small size, easy to incorporate.
This small digital distance sensor detects objects between 2 cm and 10 cm apart. With its fast response time, small size and low current consumption , this sensor is a good choice for detecting non-contact objects in compact PCBs facilitating integration into your project.