Call Us: +351 707 011 964
Email: info@electrofun.pt
New
Bi-directional Logic Level Converter 4-channel by I2C BSS138
€13.23
(SEM IVA 10.76€)
Pololu
i0432pl
Bi-directional Logic Level Converter 4-channel by I2C BSS138
Bi-directional Logic Level Converter 4-channel by I2C BSS138
We do have some other handy level shifters in the shop, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.
This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer. While we designed it for use with I2C, this works as well for TTL Serial.
Includes:
• 1x Conversor Bi-direcional de Nível Lógico 4-canais por I2C BSS138
4 other products in the same category:
Breakout Current Sensor ACS723 - SparkFun
Price
€11.50
The SparkFun Current Sensor Breakout is a High Precision Card that uses the ACS723 for Moderate AC and DC Current Detection Applications. The ACS723 Sensor uses a Hall Effect Sensor to Emit a Voltage relative to the Current that flows through the IP + and IP- Pins on the Board. The advantage of using a Hall Effect Sensor, specifically, is that the Circuit Being Detected and the Sensor Reading Circuit are Electrically Isolated, which means that although your Arduino is Operating at 5V, the Detected Circuit may be Operating at Higher DC or AC voltages.
Bi-directional Logic Level Converter 4-channel by I2C BSS138