Shield Bot is an easy-to-use, entry-level robotics platform that helps you get into the world of robotics. With this kit you can build a line follower robot in a few minutes using the library and code provided.
The Chassis for Robot from 5" RRC04A is a Chassis from Acrylic of 1/8" that provides a base for our 42x19mm gear motors, brackets and wheels. TheChassisof theRobot has many mounting holes that allow you to mount a variety of components on it. With a diameter of just five inches, thisChassismade ofAcrylicis great for building robots capable of navigating tight spaces.
The Motor Driver de Stepper DRV8825 is a Module Indicated for Control of Stepper Motors of 3D Printers and CNC Equipment, With Current Regulation by Trimpot. The Module Accepts Power between 8.2V and 45V and can supply up to 1.5A per Phase, Supporting Micro Resolution up to 1/32 Steps. It has current and temperature overload protection.
The Multifunctional Robot Car controlled by Bluetooth is an updated version of the Automatic Operating Car, adding Bluetooth control. The Robot Car controlled by Bluetooth is based on the Arduino AtMega328p. It has hunting, obstacle avoidance and remote control functions. And you can also expand the external modules to increase the car's functions.
This acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components.
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors.
Tamiya’s steel-ball caster is a good way to give a “third wheel” to a small robot powered by a differential drive. The kit comes with enough parts to make two casters, either 25 mm or 35 mm in height.
Este é o ActoBitty 2 da Actobotics, um kit de robotização para iniciação fácil de montar. Este pequeno kit, uma vez montado, cria uma pequena plataforma robótica que, com um Arduino anexado, você pode começar a usar quase que imediatamente! Dentro deste kit, você encontrará todas as peças mecânicas e motores necessários para construir esta pequena plataforma robô.
This module is based on the popular L298N H Bridge DC Motor Driver . The circuit will allow you to easily and independently control two motors up to 2A each in both directions.
This DC motor driver can be used on 4WD mobile robot platforms, combat robots, smart car competition, drive pumps, electric fans, transporters, etc ...
Unleash your inner Mad Max and make your vehicle a reality with the Mini Robot Rover Kit. This kit offers everything you need to build the frame of a two wheel drive Robot Rover! Obtains 4-6 VDC Chassis, Engines and Wheels. It will fill the rest with Power Supply, Microcontroller or Microcomputer and a Dual H Bridge Motor Controller.
The RoverC is a programmable omnidirectional mobile robot base compatible with the M5StickC and can be started with the insertion of the M5StickC. The main controller of the base is the microcontroller stm32f030f4. The base comes with N20 worm gear motors, which are directly driven by a four-channel motor driver. These motors are connected to the mechanum wheels, which can move in all directions. In addition, two Grove-compatible I2C ports are provided to facilitate expansion to other modules.