Yellow Rubber Wheels with a diameter of 3.7cm.

The TinkerKit Arm is a fully operational Robotic Arm, controlled via Arduino. It can be assembled in a variety of ways for various tasks, such as moving objects. You can also attach a camera or solar panel. There are many ways Arm can extend the range of your devices.

Tamiya’s steel-ball caster is a good way to give a “third wheel” to a small robot powered by a differential drive. The kit comes with enough parts to make two casters, either 25 mm or 35 mm in height.

Shield Bot is an easy-to-use, entry-level robotics platform that helps you get into the world of robotics. With this kit you can build a line follower robot in a few minutes using the library and code provided.

The Shadow Chassis is a marvelously durable and modular robot platform from RobotZone. 

This acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components.

Kit Chassis Romi from Polulu. Ideal for those who want to develop a remote controlled robot car, line follower, fire engine, etc.

Kit Chassis Romi from Polulu. Ideal for those who want to develop a remote controlled robot car, line follower, fire engine, etc.

RobotFrog

The MeArm Classic Maker Kit version is an easy-to-build Kit Robot Arm designed for kids and adults alike to learn about technology, engineering and programming. It was expressly designed to be easy to build (+11 years old) and easy to use. You can use any control board you like. It also gives you the freedom to use any type of arm control that will connect to your board, be it a joystick, keyboard, levers, or slider potentiometer. The only tool you'll need to build it is a hex wrench, and one is included in the box.

The Chassis for Robot from 5" RRC04A is a Chassis from Acrylic of 1/8" that provides a base for our 42x19mm gear motors, brackets and wheels. The Chassis of the Robot has many mounting holes that allow you to mount a variety of components on it. With a diameter of just five inches, this Chassis made of Acrylic is great for building robots capable of navigating tight spaces.

This Robot Kit does not need welds or cables to mount it, you will only need one screw.
Bit:Bot can be used by children and adults and this Kit allows you to explore and encode Micro:Bit using one of the available languages (all features are not supported in all languages).

An 3WD Car Kit with Arduino Uno R3. Ideal for those who want to develop a remote-controlled robot car, line follower, fire truck, etc.

The RoverC is a programmable omnidirectional mobile robot base compatible with the M5StickC and can be started with the insertion of the M5StickC. The main controller of the base is the microcontroller stm32f030f4. The base comes with N20 worm gear motors, which are directly driven by a four-channel motor driver. These motors are connected to the mechanum wheels, which can move in all directions. In addition, two Grove-compatible I2C ports are provided to facilitate expansion to other modules.

Pololu Wheel 60×8mm Pair - White

The Multifunctional Robot Car controlled by Bluetooth is an updated version of the Automatic Operating Car, adding Bluetooth control. The Robot Car controlled by Bluetooth is based on the Arduino AtMega328p. It has hunting, obstacle avoidance and remote control functions. And you can also expand the external modules to increase the car's functions.

This is the Multi-Chassis Basic 4WD Kit, an easy to assemble and use robot chassis platform. 

O Seguidor de Linhas é uma placa longa composta por oito sensores IR. Este foi desenhado para seguir uma linha escura (spray ou fita isoladora) num fundo claro de cerca de 7,6 cm de largura ou menor .