This is a 1.8" Colorful Display Module designed for the BBC micro:bit.

A-Star 32U4 Prime LV microSD

A-Star 32U4 Prime SV

Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.

Arduino Wire with ATmega328

The Atlas Scientific pH circuit designs currently available on the Internet are outdated and use a significant number of overly complex analog components. Atlas Scientific has reinvented and refined the pH circuit of the past to a more modern and simple to use model.

Unlock your potential and get creative with code, electronics, science and engineering, with the BBC Micro:Bit Starter Pack anything is possible! This Micro:Bit V2 Kit contains everything you need to start using Micro:Bit right away. It consists of a BBC Micro:Bit V2, a USB Cable, a Battery Holder with 2 AAA Batteries. The USB Cable allows you to connect your Micro:Bit to a computer. A Batteries allow you to power your BBC Micro:Bit after disconnecting it from the USB.

The Bluetooth Module 4.0 BLE Micro EVB can be easily placed on your PCB card, just ignore problems such as "how to design an antenna", "how to make a bluetooth chip work" and so on. The Bluetooth 4.0 BLE Micro EVB Module is perfect for portable projects. With it, you can use Android or IOS devices to communicate with your clothes!

The Car Ring: Bit is a small smart DIY car driven by the Micro: Bit of the BBC and Ring: Bit. The Ring: Bit extends the 3 GPIO ports of the Micro: Bit and allows different sensors and components to be easily connected to the Micro: Bit.

The Plus is an enhanced M5 Module that comes with Lipo battery (500mAh), gear potentiometer, IR transmitter, port PORT B (GPIO port) extended, port C (UART port) of the MS core and a microphone solder block. Equipped with MEGA328, it can be a major upgrade of hardware resources, adding PLUS to your work.

Communication Protocol: IIC (0x62).

The Console Module with Buttons for Micro: Bit is an expansion gamepad based on micro: bit. You just need to connect the micro: bit, and it will turn into a wireless remote control or a wireless gaming console.

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Cutebot is a rear-wheel drive smart car powered by high-speed twin engines. There is a lot of equipment on board in the Cutebot, including ultrasonic sensor and distance sensor, two RGB LED headlamps and lamps at the bottom, two line tracking probes, an active buzzer as the horn and so on. ! Let's drive your first smart car!

Development Board ESP32-DEVKITC-S1.

This Educational Robot Kit Micro: Maqueen for Micro: Bit is a graphical programming robot for STEM education, which inherits micro-bit gameplay and simple operation. Mini-body, cool features and plug-and-play allow children to quickly learn visual programming in entertainment, showing children's interest in science and logical reasoning.

The WT32-SC01 is a Board from Development based on the ESP32 with 3.5 touch screen inches (320x480 pixels), in color, which was recently launched by Wireless-Tag Technology Co. Ltd.

A ESP32 NodeMcu WiFi CP2102 Module with Built-in Antenna, MicroUSB Connector, Bluetooth BLE 4.2, Analog Digital Converter, GPIO with PWM Functions, 12C, SPI, Etc and Supports Remote Firmware Upgrade.

This board is the combination of 3 extremely interesting products: a ESP32 Module with WiFi and Bluetooth, a oLED Display and a battery charging and charging system Lithium-Ion 18650.

The ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps.

Finger is a fingerprint sensor that makes fingerprint verification super simple.

The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.

This unit communicates with the M5Core by UART protocol connected via PORTC.

Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your idea buds.
This Grove - Starter Kit for Arduino is upgraded version of our Grove Starter Kit plus. We included more frequently encountered modules in this kit to support your concept buildup.Optimize the internal slot structure, using technology to make our products inside plastic boxes more regularized, more protective.

JoyC is a Joystick Module designed for the M5StickC. Supports two-handed operation. The main control chip is STM32F030F4, it uses the I2C communication protocol and the M5StickC host for data transmission. The joystick range is from 0 to 200, includes 12 RGB LEDs, and the bottom of the joystick contains 16340 battery holder.

The 8 Environment Sensors Kit, M5Stack Env Kit, includes the 8 Earth, Angle, Pir, Hub, Light, Rgb, Ir and Env Sensors.

The ElecFreaks Kit Basic Micro:Bit is a Basic Level Kit. The 5 most common Electrical Modules, which can be easily connected to the Micro:Bit via Basic:Bit. This kit can help students learn how to quickly build their Micro:Bit projects. These Modules can be directly triggered by Makecode. No need to add any extra packages. It is helpful for students to understand the use of these electrical modules from their principle.

This Starter Kit is especially made for those who are learning the programming and electrical circuit. The Kit contains basic electrical components such as LEDs, buttons, buzzer, heat sensor, steering motor and so on.