(SEM IVA 22.07€)
Arduino Wire with ATmega328
The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad.Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby.Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable. Checkout our tutorial on wireless bootloading!Note: The miniUSB connector is used for battery charging only. To bootload new firmware, you will need an external serial connection over an FTDI Basic, FTDI cable, or other serial connection. Check the related products below.Note: The XBee socket and FTDI connection live on the same TX/RX pins of the ATmega328. You will need to remove the XBee module while reprogramming over serial. We recommend using a wireless bootloader whenever possible to avoid this step.Note: A portion of this sale is given back to Arduino LLC to help fund continued development of new tools and new IDE features.Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide!Features:ATmega328V running at 8MHzArduino BootloaderXBee socketLithium Polymer battery compatibleMCP73831T LiPo ChargerReset buttonOn/Off SwitchStatus/Charge/RSSI LEDsDocuments:SchematicEagle FilesDatasheet (MCP73831T)GitHubArduino Fio HomepageFunnel hardwareReplaces:DEV-09712
Includes:
• 1x Arduino Fio com ATmega328
This IO Extender is an easy-to-use, low-cost Board Expansion for micro:bit. It drives all micro:bit IO ports and has a specially designed port for “HuskyLens AI Camera”. This board can be used to provide a stable 5V power supply for the HuskyLens to make it work steadily in all modes.
This is a 1.8" Colorful Display Module designed for the BBC micro:bit.
Color is a Light to Digital Color Converter with IR Filter. The TCS3472 Device provides a digital red, green, blue (RGB) return and sharp light detection values. An infrared blocking filter, integrated in the chip and located in the color-sensing photodiodes, minimizes the infrared spectral component of the received light and allows color measurements to be made accurately.
This unit communicates with the M5Core through the Grove (I2C) port. The address is 0x29.
Arduino Wire with ATmega328
