This is the Infrared Proximity Sensor made by Sharp.

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled).

This LED Matrix 24 × 8 display is specially designed for the FireBeetle series. It supports low power mode and scroll display. With HT1632C high-performance LED driver chip , each led has an independent register, which facilitates separate driving. Integrates a 256KHz RC clock, only 5uA in low power mode, supports 16-scale PWM brightness adjustment. This product also works with another Arduino microcontroller like Arduino UNO (same as DFRduino UNO).

Carbon monoxide detector with alarm - orno

LCD Gráfico 128x64 STN LED Backlight

This Shuck Socket it is easy to use and to install.

The Kit Set of Torix Connectors is widely used in building wiring. By selecting the best insulation material, it is durable, corrosion free, anti-aging, pressure 4kv and against electric shock. It breaks the disadvantage of the traditional wiring method which is problematic in wiring, easy to leak, and easy to corrode.

This UV Sensor is capable of detecting UV solar radiation using a simple UVM-30A chip. It can be easily configured for projects with Arduino to monitor UV Index, analyze UV-A lamps or DIY projects as plant growth analysis.

When you assign a high level to the module pin, the electro magnet can suck magnetically conductive objects. Otherwise, it will release the object.

An electro magnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to the Ampere Law. To focus the magnetic field on an electro magnet, the wire is wound into a coil with many twists of wire side by side. The Magnetic Field of All Twists of the Wire passes through the Coil Center, creating a Strong Magnetic Field there.

It's Easy to Use to Learn the Electro Magnet Principle.

The 8 Environment Sensors Kit, M5Stack Env Kit, includes the 8 Earth, Angle, Pir, Hub, Light, Rgb, Ir and Env Sensors.

Finger is a fingerprint sensor that makes fingerprint verification super simple.

The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.

This unit communicates with the M5Core by UART protocol connected via PORTC.

Now, it's time to add a more sophisticated interactive way to your project. The DFRobot touch kit comes with three types of touch sensors . A ipod styple touch wheel, a touch touch screen that supports backlit and a grid touch pad that can recognize something unique.

Can be used to monitor the heart rate of the patient and athlete. The result can be displayed on a screen via the serial port and can be saved for analysis.