The Motor Driver de Stepper DRV8825 is a Module Indicated for Control of Stepper Motors of 3D Printers and CNC Equipment, With Current Regulation by Trimpot. The Module Accepts Power between 8.2V and 45V and can supply up to 1.5A per Phase, Supporting Micro Resolution up to 1/32 Steps. It has current and temperature overload protection.

15A Individual DC Motor Controller

Encoder for Pololu Wheel 42x19mm

SparkFun PWM Shield

EasyDriver Stepper Motor Driver V44

Big Easy Driver

SparkFun Wireless Motor Driver Shield

H-bridge Stepper Motor Dual DC Motor Driver L9110S

Pololu Aluminum Scooter Wheel Adapter for 4mm Shaft

Expansion Kit for 3pi Robot.

Pololu Carrier for MQ

Wio Link - IoT Controller

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors.

Motor Speed Controller 12-40V 10A

This compact carrier board makes it easy to integrate a Sharp GP2Y0A60SZLF analog distance sensor (not included) into your project by providing all of the required external components and a 0.1?-pitch, four-pin interface to the sensor. This version of the carrier board is configured for 3V mode.

O SparkFun Pi Servo HAT permite que o Raspberry Pi controle até 16 servos motores de maneira directa e descomplicada por meio de uma conexão I2C.

This rubber ring is used to attach the ultrasonic sensor.

2 Sport Tires 70111 Set by Tamiya

Set of 1 0 nylon studs ideal for mounting all types of printed circuit boards, sensors, mechanical parts.

This black polyurethane wheel measures 84mm in diameter and 24mm in width and works with 608 rpm bearings.

This module is based on the popular L298N H Bridge DC Motor Driver . The circuit will allow you to easily and independently control two motors up to 2A each in both directions.

Photoelectric sensor tracking module for five-channel infrared detection tracking.

This DC motor driver can be used on 4WD mobile robot platforms, combat robots, smart car competition, drive pumps, electric fans, transporters, etc ...

Which wheels should your robot car use? How about the Wheel of Mecanum! The Mecanum Wheel is an omnidirectional wheel design for a land vehicle to move in any direction, such as going straight, obliquely, horizontally, line S and turning at any angle with zero radius.

JoyC is a Joystick Module designed for the M5StickC. Supports two-handed operation. The main control chip is STM32F030F4, it uses the I2C communication protocol and the M5StickC host for data transmission. The joystick range is from 0 to 200, includes 12 RGB LEDs, and the bottom of the joystick contains 16340 battery holder.

Regulador carga p/ painel solar c/ 2USB

Conversor 220V-110V