Do you find the world of robotics interesting? It's very easy to create a robot! With this 2WD Round Chassis for Robot Cart, a microcontroller (Arduino), some sensors and programming you will be able to develop the robot of your dreams!

Bracket Pair for Sharp GP2Y0A02, GP2Y0A21.

The Motor Driver de Stepper DRV8825 is a Module Indicated for Control of Stepper Motors of 3D Printers and CNC Equipment, With Current Regulation by Trimpot. The Module Accepts Power between 8.2V and 45V and can supply up to 1.5A per Phase, Supporting Micro Resolution up to 1/32 Steps. It has current and temperature overload protection.

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors.

Encoder for Pololu Wheel 42x19mm

H-bridge Stepper Motor Dual DC Motor Driver L9110S

Which wheels should your robot car use? How about the Wheel of Mecanum! The Mecanum Wheel is an omnidirectional wheel design for a land vehicle to move in any direction, such as going straight, obliquely, horizontally, line S and turning at any angle with zero radius.

Micro Metal Gearmotor 0.9A - 50:1

Motor Speed Controller 12-40V 10A

The Pack of 4 Black Wheels is a product specially designed for the construction of robots stands.

Pololu Aluminum Scooter Wheel Adapter for 4mm Shaft

This compact carrier board makes it easy to integrate a Sharp GP2Y0A60SZLF analog distance sensor (not included) into your project by providing all of the required external components and a 0.1?-pitch, four-pin interface to the sensor. This version of the carrier board is configured for 3V mode.

Pololu Wheel 60×8mm Pair - White

This Replacement Ball 3pi Robot with 1/2″ Plastic Ball can be used as a 3pi Robot Spare Part or as a General Purpose Ball. When mounted through a Hole in a Chassis using our 32 × 7mm Metal Gearmotors and Wheels, as in the 3pi, this Ball is the Right Height to keep the Chassis Level.

The Chassis for Robot from 5" RRC04A is a Chassis from Acrylic of 1/8" that provides a base for our 42x19mm gear motors, brackets and wheels. The Chassis of the Robot has many mounting holes that allow you to mount a variety of components on it. With a diameter of just five inches, this Chassis made of Acrylic is great for building robots capable of navigating tight spaces.