Client support
Email: info@electrofun.pt
(SEM IVA 31.42€)
GY-80 BMP085 Magnetic Field, Acceleration, Gyroscope
Features:Nine axis modules (three-axis gyro + three axis acceleration + tri-axial magnetic field +BMP085 ).Module chips: L3G4200D+ADXL345+HMC5883L+BMP085.Power supply: 3V-5V.Communication mode: I2C communication protocol (fully compatible with 3-5V systems).Board size: 25.8mm*16.8mm.The default with pin, straight and curved, no weldingAll of the individual sensors are accessible over I2C so you only need 4 connections to access all those sensors. SDA, SCL, Ground and VCC (you can use 3.3v or 5v).Code: L3G4200D(3-Axis Gyroscope Sensor)L3G4200D DatasheetBildr Tutorial: http://bildr.org/2011/06/l3g4200d-arduino/ ADXL345 (3-Axis Digital Accelerometer)ADXL345 DatasheetBildr Tutorial: http://bildr.org/2011/03/adxl345-arduino/ HMC5883L (3-Axis Digital Compass)HMC5883L DatasheetBildr Tutorial: http://bildr.org/2012/02/hmc5883l_arduino/ BMP085(Barometric Pressure and Temperature Sensor from Bosch)BMP085 DatasheetBildr Tutorial: http://bildr.org/2011/06/bmp085-arduino/ Schematic:
Includes:
• 1x GY-80 BMP085 Campo Magnético, Aceleração, Giroscópio
Piezo Vibration Sensor - Large
This is a small Force Sensitive Resistor . It has an Active Detection Area of 0.16 "(4mm) in Diameter. This FSR from Interlink Electronics varies its Resistance depending on how much Pressure is being applied to the Detection Area. The stronger the Force, the lower the Resistance. When there is no Pressure Applied to the FSR, its Resistance will be greater than 1MΩ, with the Total Pressure applied to the Resistance it will be 2.5kΩ Two Pins extend from the Bottom of the Sensor, making it friendly to the Breadboard. are simple to set up and great for detecting pressure.