Client support
Email: info@electrofun.pt
(SEM IVA 17.69€)
A 3½ Digit Digital Multimeter Catii500v/catiii300v, by Velleman.
A 3½ Digit Digital Multimeter Catii500v/catiii300v, by Velleman.
Specifications:
• NCV Function;
• Manual Adjustment;
• Reading Retention Function (Data Hold);
• Display with Backlight;
• Led Flashlight;
• Low Battery Indicator;
• Battery and Test Leads Included;
• Dc Voltage (Manual Adjustment): 0-200mv /2000mv /20v /200v /500v:
• Basic Accuracy: ±(1.0% of Reading+2 Digits);
• Input Impedance: 1mΩ;
• Overload Protection: 500vdc or Ac Rms;
• Ac Voltage: 0-200v /500v:
• Basic Accuracy: ±(1.5% of Reading+3 Digits);
• Input Impedance: 450kΩ;
• Overload Protection: 500vdc or Ac Rms;
• Frequency Range: 40-500hz;
• Display: Rms or Sine Wave Value (Average Value);
• Resistance: 0-200Ω /2000Ω /20kΩ /200kΩ /2000kΩ:
• Basic Accuracy: ±(1.0% of Reading+2 Digits), ±(2.0% of Reading+2 Digits);
• Resolution: 0.1ua/1ua/10ua/100ua;
• Overload Protection: Fuse 0.5a /500v;
• DC Current: 0-200µA /2000µA /20mA /200mA:
• Basic Accuracy: ±(1.5% of Reading+2 Digits);
• Overload Protection: Fuse 0.5a /500v;
• Diode Measurement: Test Diode Voltage:
• Test Voltage: Approximately;
• Overload Protection: Fuse 0.5a /500v;
• Continuous Audible Measurement: An Audible Signal Is Emitted If Resistance Is Less Than 50ohm;
• Siren: Integrated Audible Warning Will Play Whenever Active Voltage Is Detected;
• Test Voltage: 90v-1000vac Rms;
• Display: LCD 3 1/2 Digits;
• Battery: 1.5v x2 Aaa R03p (incl.);
• Dimensions: 125mmx75mmx25mm.
Includes:
• 1x Digital Multimeter 3½ Digits Catii500v/catiii300v, by Velleman.
The new Xiaomi Mi Band 5 was made so that all those who love sport can have a lot of fun. With the ability to collect all the data you need from your sports practice, you also have the ability to show the state of your health: the state of your sleep and your state of health, accompanied by the control of the menstrual cycle. All of this together with many new features that make it one of the models of the moment. Read on and you will discover why we are in love with her!
Designed to facilitate the creation of IOT projects, the Arduino Oplà is based on a Arduino MKR WiFi 1010 , on which the Arduino wrapped in a plastic box. The kit includes a round OLED Display, along with Five Touch Buttons and Multiple Sensors to Monitor Air Pressure, Humidity, Light Intensity and Temperature. However, Additional Sensors must be simple to connect, like a PIR Sensor, which the Arduino also groups.
The Bluetooth V3.0 Headset with Mic gives you comfort and freedom while promoting safer driving.
Cable Column 2x1.50mm Round Black with 1 Meter Length.