The GSM Module/GPRS based on the Simcom Arduino Shield module. The module allows you to obtain SMS, MMS, GPRS and Audio via UART commands by sending AT commands (GSM commands 07.07, 07.05 and simCOM enhanced with COM commands). The module also has 12 GPIOs, 2 PWMs and an ADC from the SIM900 module (they are all 2V8 logic) present on board.
This Rectifier Diode (1N4002) contains a diffuse junction, high current capacity, low voltage, voltage overload at 30A, low reverse leakage current and has a lead-free coating, compatible with to RoHS.
This Power Diode (1N4003) contains a diffuse junction, high current capacity, low voltage, voltage overload at 30A, low reverse leakage current and has a lead-free coating, compatible with to RoHS.
This panel mount Toggle Switch has built-in indicator lights so you know when the switch is on. They mount in a 20.2mm diameter hole and are rated up to 16A 12V. These SPST switches have three terminals, the two of which you would normally see plus one at the blue LED. Although these are for 12V, the LED only works on 5V.
This small On/Off/On Round Switch up to 10A at 125V AC can be mounted on a panel with a 20mm diameter hole. It will also look very elegant in your project.
This small On/Off Round Switch up to 10A at 125V AC can be mounted on a panel with a 20mm diameter hole. It will also look very elegant in your project.
A Pedal of Metal. This is the same type of Pedal you might find on a tattoo machine or as a damper pedal on an electric piano. The non-slip pad on the top and rubber bumpers on the bottom prevent the pedal from slipping out of place during use. If it opens, it's a simple switch and a big spring. This Pedal, however, has been described as "elegant and generous" and I think we have to agree.
This Power Diode (1N4006) contains a diffused junction, high current capability, low forward voltage drop, surge overload rating to 30A peak, low reverse leakage current, lead free finish and it is RoHS compliant.