(SEM IVA 19.69€)
The GSM Module/GPRS based on the Simcom Arduino Shield module. The module allows you to obtain SMS, MMS, GPRS and Audio via UART commands by sending AT commands (GSM commands 07.07, 07.05 and simCOM enhanced with COM commands). The module also has 12 GPIOs, 2 PWMs and an ADC from the SIM900 module (they are all 2V8 logic) present on board.
The GSM Module/GPRS based on the Simcom Arduino Shield module. The module allows you to obtain SMS, MMS, GPRS and Audio via UART commands by sending AT commands (GSM commands 07.07, 07.05 and simCOM enhanced with COM commands). The module also has 12 GPIOs, 2 PWMs and an ADC from the SIM900 module (they are all 2V8 logic) present on board.
Specifications:
• Quad-band 850/900/1800/1900Mhz: Works on GSM Networks in All Countries of the World;
• Class Multi-Slot GPRS 10/8;
• Mobile Station Gprs Class B ;
• GSM Phase 2/2+ Compatible;
• Class 4 (2Wx850/900MHz);
• Class 1 (1W x1800/1900MHz);
• Short Message Service : So You Can Send Small Amounts Of Data Over The Network (Ascii or Raw Hexadecimal);
• Embedded TCP/udp Stack: Allows You To Upload Data To A Web Server;
• Rtc Supported;
• Selectable Serial Port;
• Low Power Consumption: 1.5ma (Sleep Mode);
• Operating Temperature: -40ºC to 85ºC.
Includes:
• 1x SIM900 GSM/GPRS Shield for Arduino.
2A 250V Round Black Foot Switch.
The GSM Module/GPRS based on the Simcom Arduino Shield module. The module allows you to obtain SMS, MMS, GPRS and Audio via UART commands by sending AT commands (GSM commands 07.07, 07.05 and simCOM enhanced with COM commands). The module also has 12 GPIOs, 2 PWMs and an ADC from the SIM900 module (they are all 2V8 logic) present on board.
