The Sensor of Image Charmed Labs Pixy 2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, Pixy2 can learn to detect objects, just by pressing a button. In addition, Pixy2 has new algorithms that detect and track lines for use with line following robots. The new algorithms can also detect intersections and "traffic signs". Traffic signs can tell your robot what to do, such as turning left, turning right, slowing down, etc.

LCD Gráfico 128x64 STN LED Backlight

Pixy CMUcam5 Image Sensor

SparkFun Luminosity Sensor - TSL2561

Este módulo usa um interruptor de inclinação de mercúrio para ativar um LED. Há também uma saída digital conectada através de uma resistência de 10K embutido.

The Grove – UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. This form of electromagnetic radiation has shorter wavelengths than visible radiation. It is based on the sensor GUVA-S12D.It has a wide spectral range of 200nm-400nm. The module will output electrical signal which is varied with the change of the UV intensity. UV sensors are used for determining exposure to ultraviolet radiation in laboratory or environmental settings.

This DTMF Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With it's audio connector you can decode the crazy funny noises common phones make.

Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 3.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.

ITEAD's light sensor is mainly used to detect the intensity of light in the environment.

This small digital distance sensor detects objects between 2 cm and 10 cm apart. With its fast response time, small size and low current consumption , this sensor is a good choice for detecting non-contact objects in compact PCBs facilitating integration into your project.

The flame sensor can be used to detect fire or another wavelength in light from 760 nm - 1100 nm.

LDR Light Sensor with Relay

Play your .mp3 files stored by USB or SD card. For Use (12V): Place a 68Ohm/1W Resistor in series with the (+) of the Power Supply, to avoid excessive dissipation.

LDR (or light-dependent resistance , or photoresistor ) is a variable resistance. The light falling on the sensor decreases the resistance .

The Grove - Speaker is a module consisting of power amplification and voice outputs. The volume can be adjusted by the integrated potentiometer . With input frequencies at different, the speaker generates different tones. Encoding the music in Arduino, make your own music box yourself!

Energy Saving Lamp E27 15W 230V Green - EDM.

The Vma449 integrates the Voice Recorder ISD1820 and Playback CI to record a single message up to 20 seconds long. The recorded message is stored in the analog flash memory that keeps the message stored even in the event of a power failure. The module has an integrated microphone to record your message and buttons for recording, partial playback or full reproduction of the message functions.

Monitor the consumption of any appliance, electrical circuit or office equipment (lighting, sockets, security systems, heaters, air conditioning, etc.) individually with this compact device that works via Wifi so you can monitor everything through your smartphone.

The CNY70 has a compact construction where the emitter and receiver are arranged in the same direction to detect the presence of an object using the object's reflective IR beam.

The Module KA2284 is a Battery, Power and Audio Level Indicator.

Ficha Jack 3.5mm 4P Macho

This UV Sensor is capable of detecting UV solar radiation using a simple UVM-30A chip. It can be easily configured for projects with Arduino to monitor UV Index, analyze UV-A lamps or DIY projects as plant growth analysis.

The 5-Channel Infrared Detector Sensor Module is designed to optimize robotics and electronics projects.

Light Sensitivity Switch Kit, Velleman.

A small Audio Speaker that is ideal for radio and amplifier projects.

The purpose of this sensor is to measure the sound intensity of the surrounding environment.

This Voice Recognition Module with Microphone for Arduino can recognize up to 15 voice instructions and be suitable for most cases involving voice control. With this module, we can control cars or other electrical devices by voice.