Digital Push Button (Green)

An Educational Kit with Arduino and about 30 Modules and Components, ideal for an introduction to electronics.

A Starter Kit Educational DIY Smart Home with the Arduino UNO R3, in a Component Box with a Protective Cover, with a Sensor of PIR Movements, a Bluetooth V4.0 Module, a Water Sensor, a Relay Module, a Humidity Sensor, an LCD1602 Display, even a Screwdriver, a Set that in total consists of about 110 pieces.

This Disk Load Cell (sometimes called the Strain Gauge) can translate up to 200kg of Pressure(Force) into a Electrical Signal. Each Load Cell is capable of measuring the electrical resistance that changes in response and proportional to the voltage (eg pressure or force) applied to the disk. With this gauge, you'll be able to tell how heavy an object is, if an object's weight changes over time, or if you simply need to feel the presence of an object by measuring the tension or load applied to a surface.

A 100kohms Ntc Thermistor.

A 10kohms Ntc Thermistor.

A 1kohms Ntc Thermistor.

A 33kohms Ntc Thermistor.

This Module is a Rotary Incremental Encoder. It encodes the shaft rotation signal and outputs the signal by electronic pulse. The Grove –Encoder is a module of the Grove series and has a standard Grove interface. When you need to add a knob to your project, for example a volume knob for a speaker, a selection panel or a digital input, this should be your first choice.

The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

A Module with GPRS Antenna, operation Wireless and SIM Card.

The Kit Set of Torix Connectors is widely used in building wiring. By selecting the best insulation material, it is durable, corrosion free, anti-aging, pressure 4kv and against electric shock. It breaks the disadvantage of the traditional wiring method which is problematic in wiring, easy to leak, and easy to corrode.

Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.

The imported PL2303HX controller can stabilize the flash at high speed. With a 500mA auto-recovery fuse for protection and two data transmission indicators that can monitor the data transfer status in real time. The entire board is coated with a high-quality transparent heat-shrinkable layer, rendering the PCB in a state of isolation from the outside, so that the board is not burned. Electrostatic package, ensures that the plate will not be damaged before use. Supports WIN7 system.

MP3 Player Shield - SparkFun

LCD Gráfico 128x64 STN LED Backlight

Analog turbidity sensor for Arduino

SparkFun OpenScale

ITeaduino Tiny Digispark

FemtoBuck LED Driver - SparkFun

LinkIt Smart 7688 Duo - Arduino to Linux

Load Cell - 50Kg

SparkFun OpenLog

XBee 6.3mW Wire Antenna - Series 2C ZigBee Mesh

Flexibility Sensor 2.2

Gravity: IO Expansion Shield for Arduino V7.1

SparkFun Luminosity Sensor - TSL2561

Este módulo usa um interruptor de inclinação de mercúrio para ativar um LED. Há também uma saída digital conectada através de uma resistência de 10K embutido.