Client support
Email: info@electrofun.pt
This site uses cookies to improve your experience. By navigating this site, you consent to the use of cookies. Learn more about our cookies. |
|
This IO Extender is an easy-to-use, low-cost Board Expansion for micro:bit. It drives all micro:bit IO ports and has a specially designed port for “HuskyLens AI Camera”. This board can be used to provide a stable 5V power supply for the HuskyLens to make it work steadily in all modes.
Sensor:bit is a breakout board for Micro:Bit. The card increases the available I/O ports on Micro:Bit and transforms them into GVS. With this board, we can use various 3V modules like LED light, photocell, etc. The board has integrated a buzzer and an audio connector, which allows us to listen to music from the buzzer or with our headphones.
A Matte Blue Case in ABS to protect your Micro:Bit V2.
Unlock your potential and get creative with code, electronics, science and engineering, with the BBC Micro:Bit Starter Pack anything is possible! This Micro:Bit V2 Kit contains everything you need to start using Micro:Bit right away. It consists of a BBC Micro:Bit V2, a USB Cable, a Battery Holder with 2 AAA Batteries. The USB Cable allows you to connect your Micro:Bit to a computer. A Batteries allow you to power your BBC Micro:Bit after disconnecting it from the USB.
The Iot:Bit is a Board from Expansion based on IoT for Micro:Bit. It uses the ESP8266 as a Board of WiFi Expansion and serial port to communicate with the Micro:Bit. It also extended all available IO Ports of Micro:Bit which is led by GVS and can extend various 3V E-Blocks like LED, Photosensitive and Servo by using it. At the same time, the Iot:Bit with a built-in buzzer for external sound and a built-in RTC clock for timing without power supply. Let's create your own IoT by MakeCode!
The Cutebot is a rear-wheel drive smart car powered by high-speed twin engines. There is a lot of equipment on board in the Cutebot, including ultrasonic sensor and distance sensor, two RGB LED headlamps and lamps at the bottom, two line tracking probes, an active buzzer as the horn and so on. ! Let's drive your first smart car!
Joystick: Bit V2 is a Joystick based on Micro: Bit . Contains a 4-Way Joystick and 4 Undefined Buttons. Improves the Game Experience with its Integrated Buzzer and Vibration Engine. Joystick: Bit V2 can also be used as a Remote Control with a Good Look and Comfortable Feel.
The TPBot has the appearance of a toy and works as one, since it can be used very easily to follow lines, avoid obstacles or let it work alone (in entertainment mode). However, once the Micro: Bit is inserted, it becomes a super-complete and fully programmable smart car. It's great for working in a classroom, you can expand it with extra electronic modules and add Lego pieces.
PCB connector for Microbit
Expansion board For Micro:BIT.
The Motor Driver Motor:Bit to Micro:Bit is compatible with the Micro:Bit and can activate the 2 Channel DC Motor at the same time. Its biggest feature is that we can perform the Motor Direction Control of a Channel with only one IO Port, which reduces the number of IO Ports used.
When you start the 2-channel motor, it is not possible to connect connectors such as LED matrix, IIC, SPI, etc. In addition, it can drive partial IO ports with GVS format. It is a Good Companion for DIY Smart Cars.
The Wukong Board with Lego Support for Micro:Bit is an Integrated Breakout Board with Multiple Functions based on Micro: Bit, which has a Size Similar to Micro: Bit with Buzzer, Servo and Motor Drivers. The board is designed to adapt perfectly to Lego. It takes 20 minutes to complete the upload.
The Micro:Bit Adapter for Breadboard is based on Micro:Bit and can be connected directly to a Breadboard. Through this adapter, you can start several DIY creations. It is only compatible with the Micro:Bit.
The GeekServo Motor 9g 270 Degrees Compatible with Lego is composed of a DC Motor and Feedback Control Loop and generally PWM Controlled. There are basically 2 Types on the Market: The Limited Rotation Servo (Angle Control Focus) and Continuous Rotation Servo (Speed Control Focus).
The GeekServo Motor 9g Compatible with Lego contains protection against any excessive force with the "Jumping Over Teeth" protection. Can be Programmed by MakecodeN, JavaScript, microPythonN and C ++. The Engine is Compatible with Lego Accessories for many projects to be created!
The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.
Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!
The Ring:Bit Pack contains 200 LEGO compatible parts and the necessary electronics to assemble and program 6 different projects with Micro:Bit and Microsoft MakeCode.
Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!
The Console Module with Buttons for Micro: Bit is an expansion gamepad based on micro: bit. You just need to connect the micro: bit, and it will turn into a wireless remote control or a wireless gaming console.
Power:Bit is an expansion card of Micro: Bit of reduced size. It is powered by 2 CR2025 button batteries and has a buzzer.
This is a Speaker Expansion Module designed for the BBC micro:bit.
Get more from :MOVE mini for the BBC microbit with the servo driven Bulldozer Add-On. Code it via the MakeCode Editor and use your buggy as a construction robot.
This is a 1.8" Colorful Display Module designed for the BBC micro:bit.
The SparkFun weather:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station.