Imagine a Arduino Shield that can be configured to be an LCD, GPS, Wifi, or any Shield you can imagine!

Are you familiar with Arduino? Do you like robotic arms? This kit is your best ally! Discover all the potential of this arm, controlled by 4 servo motors.

Acrylic Transparent Plate for Arduino UNO R3.

With this Adapter Board the standard 10PIN AVRISP USBASP STK500 can be used to interface with the standard 6PIN interface converter. AVR MCU development board can be used to download interface converter. The development board can be used for the ISP interface converter.

The Arduino Due is the first Arduino board based on a 32-bit ARM core microcontroller. With 54 digital input/output pins, 12 analog inputs, it is the perfect board for powerful larger scale Arduino projects.

Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.

An Controller Module of XH-M603 Charge, very easy to use, learn more about it here at ElectroFun!

Development Board ESP32-DEVKITC-S1.

The Motor Driver de Stepper DRV8825 is a Module Indicated for Control of Stepper Motors of 3D Printers and CNC Equipment, With Current Regulation by Trimpot. The Module Accepts Power between 8.2V and 45V and can supply up to 1.5A per Phase, Supporting Micro Resolution up to 1/32 Steps. It has current and temperature overload protection.

A Starter Kit Educational DIY Smart Home with the Arduino UNO R3, in a Component Box with a Protective Cover, with a Sensor of PIR Movements, a Bluetooth V4.0 Module, a Water Sensor, a Relay Module, a Humidity Sensor, an LCD1602 Display, even a Screwdriver, a Set that in total consists of about 110 pieces.

The WT32-SC01 is a Board from Development based on the ESP32 with 3.5 touch screen inches (320x480 pixels), in color, which was recently launched by Wireless-Tag Technology Co. Ltd.

A ESP32 NodeMcu WiFi CP2102 Module with Built-in Antenna, MicroUSB Connector, Bluetooth BLE 4.2, Analog Digital Converter, GPIO with PWM Functions, 12C, SPI, Etc and Supports Remote Firmware Upgrade.

The ESP32-CAM is a WIFI + Bluetooth Development Card based on the ESP32 Chip, with the additional possibility of using a camera. It is ideal for a variety of loT applications.

This board is the combination of 3 extremely interesting products: a ESP32 Module with WiFi and Bluetooth, a oLED Display and a battery charging and charging system Lithium-Ion 18650.

This ESP8285 ESP M2 Module provides easy-to-use WiFi for any UART port and is compatible with the HC-06 Bluetooth modules. If your project uses Bluetooth, it is very easy to convert it to WiFi. Using the integrated web interface, WIFI-UART communication can be configured for TCP or UDP sockets on any port.

This Module is a Rotary Incremental Encoder. It encodes the shaft rotation signal and outputs the signal by electronic pulse. The Grove –Encoder is a module of the Grove series and has a standard Grove interface. When you need to add a knob to your project, for example a volume knob for a speaker, a selection panel or a digital input, this should be your first choice.

The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

Header Socket with 10-pin female ideal for PCB's or Arduino.