The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

The Kit Set of Torix Connectors is widely used in building wiring. By selecting the best insulation material, it is durable, corrosion free, anti-aging, pressure 4kv and against electric shock. It breaks the disadvantage of the traditional wiring method which is problematic in wiring, easy to leak, and easy to corrode.

Analog turbidity sensor for Arduino

LinkIt Smart 7688 Duo - Arduino to Linux

Load Cell - 50Kg

SparkFun OpenLog

Gravity: IO Expansion Shield for Arduino V7.1

Can be used to monitor the heart rate of the patient and athlete. The result can be displayed on a screen via the serial port and can be saved for analysis.

This is the FeatherWing Adalogger: it adds a real-time clock with battery and micro SD card storage to any Feather mainboard. Using the Headers, you can connect a FeatherWing to the top of your board and let the board fly!

When you assign a high level to the module pin, the electro magnet can suck magnetically conductive objects. Otherwise, it will release the object.

An electro magnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to the Ampere Law. To focus the magnetic field on an electro magnet, the wire is wound into a coil with many twists of wire side by side. The Magnetic Field of All Twists of the Wire passes through the Coil Center, creating a Strong Magnetic Field there.

It's Easy to Use to Learn the Electro Magnet Principle.

Kit Thermostat with LED Indicator - Velleman.

This Shuck Socket it is easy to use and to install.

This Load Sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales. This sensor can measure up to about 110 pounds.