The BME280 Atmospheric Sensor from Whadda is the easiest way to measure barometric pressure, humidity and temperature.

A Whadda Universal Temperature Sensor Mounting Kit, used for measuring indoor and outdoor temperatures, controlling the rise/fall of temperature in homes, equipment, control of temperatures in some processes, visualization of the temperature on your website, control of the temperature of your pool, etc.

The Kit Set of Torix Connectors is widely used in building wiring. By selecting the best insulation material, it is durable, corrosion free, anti-aging, pressure 4kv and against electric shock. It breaks the disadvantage of the traditional wiring method which is problematic in wiring, easy to leak, and easy to corrode.

Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.

Grove's capacitive humidity sensor (corrosion resistant) is a soil moisture sensor based on changes in capacitance. Compared to resistive sensors, capacitive sensors do not require direct exposure of metal electrodes, which can significantly reduce electrode erosion.

Sensor Temperatura PT-100

Temperature Sensor - Grove

SparkFun humidity sensor - HIH-4030

Sparkfun Temperature and Humidity Sensor- SHT15

DS18B20 is a single-bus digital temperature sensor with features of ultra-small size, wide range of applicable voltage and measurable temperature and high resolution.

This DTMF Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With it's audio connector you can decode the crazy funny noises common phones make.

Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 3.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.

The Atlas Scientific pH circuit designs currently available on the Internet are outdated and use a significant number of overly complex analog components. Atlas Scientific has reinvented and refined the pH circuit of the past to a more modern and simple to use model.

Electronic Brick - Soil moisture sensor is mainly used to detect soil moisture content . The module can obtain the soil moisture value or limit through analog or digital pins.

Uses the NTC Thermistor Sensor, Good Sensitivity. The Clean Waveform of the Comparator Output Signal is Good, Driving Capacity.

This package includes a Sensor of Level of Water and a Sensor of Humidity from Solo. If the plates have water covering the sensor components, an analog value will be available on the "SIG" connection. The Sensor of Level of Water can detect up to 4cm of water. This way, you can check if your aquarium, or your pet's water bowl, still has enough water. You can use the Sensor of Moisture of the Soil to check your plant's soil or growing environment, for example.

DHT22 is a digital capacitive humidity sensor and humidity module is one that contains the compound has been calibrated with digital signal output from the temperature and humidity sensors . < / p>

Play your .mp3 files stored by USB or SD card. For Use (12V): Place a 68Ohm/1W Resistor in series with the (+) of the Power Supply, to avoid excessive dissipation.

The Grove - Speaker is a module consisting of power amplification and voice outputs. The volume can be adjusted by the integrated potentiometer . With input frequencies at different, the speaker generates different tones. Encoding the music in Arduino, make your own music box yourself!

The Vma449 integrates the Voice Recorder ISD1820 and Playback CI to record a single message up to 20 seconds long. The recorded message is stored in the analog flash memory that keeps the message stored even in the event of a power failure. The module has an integrated microphone to record your message and buttons for recording, partial playback or full reproduction of the message functions.

The Earth Unit is a Sensor for measuring Humidity in Soil or Similar Materials. The Soil Moisture Sensor is quite simple to use. The two large stake-type sensors act as probes for the sensor, acting together as a variable resistance. The higher the moisture in the soil, the better the conductivity between the two, so that the sensor results in less resistance and higher GIS output.

You can read the moisture in the soil through ADC. Within this unit, there is an extra potentiometer to change the measurement range.

The Module KA2284 is a Battery, Power and Audio Level Indicator.

A small Audio Speaker that is ideal for radio and amplifier projects.

Kit Thermostat with LED Indicator - Velleman.

The purpose of this sensor is to measure the sound intensity of the surrounding environment.

This Voice Recognition Module with Microphone for Arduino can recognize up to 15 voice instructions and be suitable for most cases involving voice control. With this module, we can control cars or other electrical devices by voice.