A 100kohms Ntc Thermistor.

A 10kohms Ntc Thermistor.

A 1kohms Ntc Thermistor.

A 33kohms Ntc Thermistor.

This Module is a Rotary Incremental Encoder. It encodes the shaft rotation signal and outputs the signal by electronic pulse. The Grove –Encoder is a module of the Grove series and has a standard Grove interface. When you need to add a knob to your project, for example a volume knob for a speaker, a selection panel or a digital input, this should be your first choice.

The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

A Module with GPRS Antenna, operation Wireless and SIM Card.

The Kit Set of Torix Connectors is widely used in building wiring. By selecting the best insulation material, it is durable, corrosion free, anti-aging, pressure 4kv and against electric shock. It breaks the disadvantage of the traditional wiring method which is problematic in wiring, easy to leak, and easy to corrode.

The imported PL2303HX controller can stabilize the flash at high speed. With a 500mA auto-recovery fuse for protection and two data transmission indicators that can monitor the data transfer status in real time. The entire board is coated with a high-quality transparent heat-shrinkable layer, rendering the PCB in a state of isolation from the outside, so that the board is not burned. Electrostatic package, ensures that the plate will not be damaged before use. Supports WIN7 system.

ITeaduino Tiny Digispark

LinkIt Smart 7688 Duo - Arduino to Linux

Load Cell - 50Kg

XBee 6.3mW Wire Antenna - Series 2C ZigBee Mesh

Flexibility Sensor 2.2

This is the Mini Reed Magnetic Sensor Module for Arduino! Reed switches are driven by magnets and are used in Mechanical Systems as Proximity Sensors.

The Arduino WTV020-SD MP3 Module is a voice recording module with 1GB SD Card storage capacity. You can upload WAV and AD4 format files that conform to FAT formatting. It supports 6KHz to 32KHz, being 36KHz for AD4 files and 6-16KHz for voice sampling rate (Audio Sampling).

When you assign a high level to the module pin, the electro magnet can suck magnetically conductive objects. Otherwise, it will release the object.

An electro magnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to the Ampere Law. To focus the magnetic field on an electro magnet, the wire is wound into a coil with many twists of wire side by side. The Magnetic Field of All Twists of the Wire passes through the Coil Center, creating a Strong Magnetic Field there.

It's Easy to Use to Learn the Electro Magnet Principle.

Voltage Sensor Module.

The 5-Channel Infrared Detector Sensor Module is designed to optimize robotics and electronics projects.

SW-420 Motion and Vibration Sensor Module.

Learn about the capacity of your battery whenever you want with this Lithium Battery Capacity Indicator Module!

This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens.