The 5-Channel Infrared Detector Sensor Module is designed to optimize robotics and electronics projects.

Basic breakout board for the TEMT6000 Ambient Light Sensor.

The flame sensor can be used to detect fire or another wavelength in light from 760 nm - 1100 nm.

Analog turbidity sensor for Arduino

Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.

Color is a Light to Digital Color Converter with IR Filter. The TCS3472 Device provides a digital red, green, blue (RGB) return and sharp light detection values. An infrared blocking filter, integrated in the chip and located in the color-sensing photodiodes, minimizes the infrared spectral component of the received light and allows color measurements to be made accurately.

This unit communicates with the M5Core through the Grove (I2C) port. The address is 0x29.

DHT22 is a digital capacitive humidity sensor and humidity module is one that contains the compound has been calibrated with digital signal output from the temperature and humidity sensors . < / p>

This Flame Sensor is sensitive to the flame, but also can detect ordinary light. Usually used as a flame alarm. 

Digital Push Button (Green)

A Starter Kit Educational DIY Smart Home with the Arduino UNO R3, in a Component Box with a Protective Cover, with a Sensor of PIR Movements, a Bluetooth V4.0 Module, a Water Sensor, a Relay Module, a Humidity Sensor, an LCD1602 Display, even a Screwdriver, a Set that in total consists of about 110 pieces.

When you assign a high level to the module pin, the electro magnet can suck magnetically conductive objects. Otherwise, it will release the object.

An electro magnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to the Ampere Law. To focus the magnetic field on an electro magnet, the wire is wound into a coil with many twists of wire side by side. The Magnetic Field of All Twists of the Wire passes through the Coil Center, creating a Strong Magnetic Field there.

It's Easy to Use to Learn the Electro Magnet Principle.

Energy Saving Lamp E27 15W 230V Green - EDM.

This is the FeatherWing Adalogger: it adds a real-time clock with battery and micro SD card storage to any Feather mainboard. Using the Headers, you can connect a FeatherWing to the top of your board and let the board fly!

FemtoBuck LED Driver - SparkFun

Ficha Jack 3.5mm 4P Macho

Flexibility Sensor 2.2

Gravity: IO Expansion Shield for Arduino V7.1

This Module is a Rotary Incremental Encoder. It encodes the shaft rotation signal and outputs the signal by electronic pulse. The Grove –Encoder is a module of the Grove series and has a standard Grove interface. When you need to add a knob to your project, for example a volume knob for a speaker, a selection panel or a digital input, this should be your first choice.