This Shuck Socket it is easy to use and to install.

The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.

Gravity: IO Expansion Shield for Arduino V7.1

This is the FeatherWing Adalogger: it adds a real-time clock with battery and micro SD card storage to any Feather mainboard. Using the Headers, you can connect a FeatherWing to the top of your board and let the board fly!

Load Cell - 50Kg

Analog turbidity sensor for Arduino

Flexibility Sensor 2.2

ITeaduino Tiny Digispark

Color is a Light to Digital Color Converter with IR Filter. The TCS3472 Device provides a digital red, green, blue (RGB) return and sharp light detection values. An infrared blocking filter, integrated in the chip and located in the color-sensing photodiodes, minimizes the infrared spectral component of the received light and allows color measurements to be made accurately.

This unit communicates with the M5Core through the Grove (I2C) port. The address is 0x29.

DHT22 is a digital capacitive humidity sensor and humidity module is one that contains the compound has been calibrated with digital signal output from the temperature and humidity sensors . < / p>

Voltage Sensor Module.

FemtoBuck LED Driver - SparkFun

The 5-Channel Infrared Detector Sensor Module is designed to optimize robotics and electronics projects.