El adaptador USB a serie Pololu es ideal para conectar diseños de microcontroladores a una computadora personal. El adaptador usa niveles de señal de 3.3 V, por lo que puede conectarlo directamente a cualquier microcontrolador que funcione a hasta 5 V sin la molestia de un convertidor de nivel RS-232 a TTL.
O sensor de fluxo de água consiste em um corpo de válvula de plástico, um rotor de água e um sensor de efeito hall. Quando a água flui através do rotor, o rotor rola.
This set includes a pair of 42×19mm wheels, a pair of extended brackets, and two matching encoders. Just pick a pair of micro metal gearmotors to complete your feedback-enabled drive system.
Este módulo usa um interruptor de inclinação de mercúrio para ativar um LED. Há também uma saída digital conectada através de uma resistência de 10K embutido.
This semiconductor gas sensor detects the presence of combustible gas and smoke at concentrations from 300 to 10,000 ppm. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
The Grove – UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. This form of electromagnetic radiation has shorter wavelengths than visible radiation. It is based on the sensor GUVA-S12D.It has a wide spectral range of 200nm-400nm. The module will output electrical signal which is varied with the change of the UV intensity. UV sensors are used for determining exposure to ultraviolet radiation in laboratory or environmental settings.
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development boards like our very own SparkFun ESP8266
The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The shield also have two Grove connectors and a microSD card socket to support projects which require storing large amounts of data from Grove sensor. The RJ45 port (Where the Ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.
DS18B20 is a single-bus digital temperature sensor with features of ultra-small size, wide range of applicable voltage and measurable temperature and high resolution.
This DTMF Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With it's audio connector you can decode the crazy funny noises common phones make.
This compact carrier board makes it easy to integrate a Sharp GP2Y0A60SZLF analog distance sensor (not included) into your project by providing all of the required external components and a 0.1?-pitch, four-pin interface to the sensor. This version of the carrier board is configured for 3V mode.
El Shield del motor se basa en el L298 , es un controlador de doble puente completo diseñado para impulsar cargas inductivas, como relés, solenoides, CC y motores paso a paso.
Esta versión de Ethernet Shield no solo es compatible con Mega 1280 y 2560, sino que también proporciona una ranura para tarjeta Micro SD para leer / escribir.
Este protector de relé es capaz de controlar 4 relés . La potencia de conmutación máxima puede ser 360VA / 90W . Puede ser controlado directamente por el Arduino mediante IOs digitales digitales con alimentación externa de 9v . Con toma xbee integrada y toma APC220, se puede controlar de forma inalámbrica a través de Xbee / bluetooth / APC220 . Conviértalo en una solución ideal para la automatización del hogar y la robótica.