A-Star 32U4 Prime LV microSD
A-Star 32U4 Prime LV microSD
(SEM IVA 11.17€)
A-Star 32U4 Micro
The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. Onboard features of the A-Star abbreviated Ax include a 16 MHz resonator, a USB Micro-B connector, an in-system programming ISP header, and a pair of indicator LEDs. A voltage regulator and power selection circuit allow the board to be powered from either USB or an external 5.5 V to 15 V source, while a resettable PTC fuse on the USB VBUS supply and reverse protection on VIN help protect it from accidental damage.
The A-Star 32U4 Micro breaks out 15 general-purpose I/O lines along two rows of pins, including 7 usable as PWM outputs and 8 usable as analog inputs; another three GPIO pins can be accessed through the 6-pin ISP header. It fits all this into a 20-pin dual in-line package DIP measuring only 1? × 0.6? even smaller than competing ATmega32U4 boards like the Teensy 2.0 and Pro Micro, and its 0.1? pin spacing makes the Ax easy to use with solderless breadboards, perfboards, and 0.1?-pitch connectors.
Our comprehensive user’s guide provides the basics you need to get started with the A-Star as well as detailed technical information for advanced users.
This product requires a USB A to Micro-B cable not included to connect to a computer.
The A-Star 32U4 ships with a preloaded Arduino-compatible bootloader which uses 4 KB of flash memory, leaving 28 KB available for the user program. We provide a software add-on that enables the board to be easily programmed from the Arduino environment.
The A-Star 32U4 uses the same microcontroller as the Arduino Leonardo and Arduino Micro and runs at the same frequency, making it just as powerful. Although the larger boards offer a few more I/O pins, the A-Star 32U4 Micro fits in an area half that of the Arduino Micro, and it takes up only 11% as much area as a standard full-size Arduino!
Pololu A-Star 32U4 Micro, Pololu A-Star 32U4 Mini SV, Arduino Micro, and Arduino Leonardo. |
---|
This diagram identifies the I/O and power pins on the A-Star 32U4 Micro; it is also available as a printable PDF 409k pdf. For more information about the ATmega32U4 microcontroller on this board, see Atmel’s ATmega32U4 documentation.
Printed on the Ax circuit board are indicators that you can use to quickly identify each pin’s capabilities: a triangle next to the pin means it can be used as an analog input, and a square wave symbol under the pin number means it can be used as a PWM output.
The board can either be powered directly from the USB 5 V supply or from a separate 5.5 V to 15 V source on the VIN pin, which is reduced to 5 V by a 100 mA low-dropout LDO regulator; you can access this 5 V supply through the 5V power output pin. Additionally, the ATmega32U4 contains an internal 3.3 V regulator whose output is available on the 3V3 pin. Current drawn from the 3V3 output should not exceed about 50 mA, and when the board is being powered through VIN, the sum of the 5V output current, 3V3 output current, GPIO output current, and current used by the board itself typically about 25 mA should not exceed 100 mA.
A 1×20-pin breakaway 0.1? male header is included with the A-Star 32U4 Micro, which can be soldered in to use the board with perfboards, breadboards, or 0.1? female connectors. The header might ship already separated into two 1×10 pieces. Also included is a 2×3 header that can be installed to allow external programming of the microcontroller through the AVR ISP interface, such as with our USB AVR programmer.
|
|
From top to bottom: A-Star 32U4 Micro, Mini SV, and Prime SV. |
---|
The A-Star 32U4 Micro is a part of our larger A-Star 32U4 family, all of whose members are based on the same ATmega32U4 microcontroller, feature native USB interfaces, and are preloaded with Arduino-compatible bootloaders. The table below shows some key features and specifications of our A-Star microcontroller boards to help you choose the right one for your application.
A-Star 32U4 Micro | A-Star 32U4 Mini ULV | A-Star 32U4 Mini LV | A-Star 32U4 Mini SV | A-Star 32U4 Prime LV | A-Star 32U4 Prime SV | |
---|---|---|---|---|---|---|
Microcontroller: | ATmega32U4 | ATmega32U4 | ATmega32U4 | |||
User I/O lines: | 18 | 26 | 26 | |||
PWM outputs: | 7 | 7 | 7 | |||
Analog inputs: | 8 | 12 | 12 | |||
Ground access points: | 2 | 4 | 43 | |||
User LEDs: | 2 | 3 | 3 | |||
User pushbuttons: | — | — | 3 | |||
Reset button: | ||||||
Power switch: | ||||||
Buzzer option: | ||||||
microSD option: | ||||||
LCD option: | ||||||
Operating voltage: | 5.5 V to 15 V | 0.5 V to 5.5 V | 2.7 V to 11.8 V | 5 V to 36 V | 2.7 V to 11.8 V | 5 V to 36 V |
Regulator type: | linear | switching step-up |
switching step-up/step-down |
switching step-down |
switching step-up/step-down |
switching step-down |
Regulated current: | 100 mA1 | 500 mA1 | 1 A1 | 500 mA1 | 1 A1 | 1 A1 |
Dimensions: | 1? × 0.6? | 1.9? × 0.7? | 2.8? × 2.1? | |||
Weight: | 1.3 g2 | 3.4 g2 | 13 g to 33 g |
1 These values are rough approximations for comparison purposes. Available current depends on input voltage, current consumed by the board, ambient conditions, and regulator topology. See product documentation and performance graphs for details.
2 Without included optional header
Inclui:
• 1x A-Star 32U4 Micro
Este módulo tem dois botões de cores diferentes. Compartilham exatamente o mesmo mecanismo, o status do botão pode ser detectado pelo status do pino de entrada, basta capturar o nível elétrico alto / baixo.
Esta unidade comunica com o M5Core através da porta Grove B.
Melhore o seu robot :MOVE Mini para o micro:bit, com esta Extensão Bulldozer controlada com um servo motor.
A Unidade Earth é um Sensor para medir a Humidade no Solo ou em Materiais Similares. O Sensor de Humidade do Solo é bastante simples de usar. Os dois grandes sensores tipo estaca funcionam como sondas para o sensor, actuando juntas como uma resistência variável. Quanto maior a humidade existente no solo, melhor a condutividade entre os dois, para que o sensor resulte em menor resistência e maior saída de SIG.
Pode ler a humidade no solo através ADC. Dentro desta unidade, existe potenciómetro extra para alterar a faixa de medição.
Relay, como seu nome indica implementa uma função de relé. O relé pode ser usado como um interruptor operado electricamente através da bobine para operar mecanicamente um interruptor, onde é necessário por vezes controlar um circuito de outra tensão e corrente de carga através de um sinal separado de baixa potência, como um sinal digital emitido por um mircoprocessador. Até 30V DC e 220V AC.