(SEM IVA 14.37€)
The RF BridgeR2 433 makes the "bridge" between Commands/Smart Devices that use Radio Frequency (RF 433.92MHz) and Smart Devices equipped with WiFi. With this RF Bridge, your Smart Devices, whether RF or WiFi, can then be controlled via an App (eWeLink), by RF Remote Commands or even by Motion Sensors, Aperture of Doors/Windows, etc.
The RF BridgeR2 433 makes the "bridge" between Commands/Smart Devices that use Radio Frequency (RF 433.92MHz) and Smart Devices equipped with WiFi. With this RF Bridge, your Smart Devices, whether RF or WiFi, can then be controlled via an App (eWeLink), by RF Remote Commands or even by Motion Sensors, Aperture of Doors/Windows, etc.
The Sonoff Bridge can use up to 16 RF Controls (RF Remote Controls, RF Remote Buttons, Motion Sensors, Door/Window Sensors). Each Remote Control is counted as a Control Device so if you use 16 4 Button Commands you will have 64 Control Signals at your disposal. The RF BridgeR2 copies and simulates the signals from the Sonoff RF Remote Controls (4 or 8 Buttons) allowing you to control, through the eWeLink App, any compatible RF Smart Device.
Compatible RF Buttons and Switches:
• 4 RF Remote Control Buttons;
• 8 Button RF Remote Control;
• RF Wall Switches RF1/RF2/RF3 RF;
• Wall Switches RF T1R1/TIR2/TIR3 RF;
• RF Pressure/Ringer.
Sonoff RF Sensors Compatible:
• PIR2: Motion Sensor;
• DW1: Door/Window Sensor;
• DW2: Enhanced Sensor of Door/Window.
Can be used to Power On/Off most 433.92MHz RF Controlled Sonoff Products, such as RF Controlled Switch, RF Controlled Socket, RF Controlled Lamp, RF Controlled Electronic Locks, etc. . Allows you to set 8 Schedule/Countdown Timers to Power On/Off RF Controlled Devices.
Specifications:
• Power: USB 5V DC 1A;
• Plug Type: MicroUSB;
• Wireless Standards:
• WiFi 802.11b/g/n;
• RF 433.92MHz.
• Antenna: AES-128 (Included in PCB);
• WiFi Range: 60m (No Obstacles);
• Security: WPA-PSK/WPA2-PSK;
• MCU: ESP8285;
• Certifications: CE, FCC, RoHS;
• Operating Temperature: -10ºC ~40ºC;
• Material: PC V0;
• Dimensions: 62x62x20mm.
Notes:
• The RF Receiver is Compatible with Fixed RF Codes Frequency 433.92MHz. For Example: PT2260, PT2262, PT2264, EV1527, Etc;
• Does Not Support Learning Rolling Codes and Dynamic Codes;
• The Bridge Can Control Devices By RF 433 But Cannot Get Their Status Operation (On/Off);
• Compatible with Amazon Alexa and Google Assistant;
• The Sonoff RF Bridge is Powered by Standard 5V MicroUSB (Adapter and Cable Not Included).
Includes:
• 1x Hub Bridge RF 433MHz WiFi Controller - Sonoff RFBridgeR2.
The Smart Wall Switch Sonoff Touch is a very modern Retro Illuminated Tempered Glass Wall Switch that works by touch. The wireless wall switch can be added to iOS/Android (App eWeLink) via WiFi, allowing users to remotely turn on/off the lights anywhere, anytime.
The RF BridgeR2 433 makes the "bridge" between Commands/Smart Devices that use Radio Frequency (RF 433.92MHz) and Smart Devices equipped with WiFi. With this RF Bridge, your Smart Devices, whether RF or WiFi, can then be controlled via an App (eWeLink), by RF Remote Commands or even by Motion Sensors, Aperture of Doors/Windows, etc.
