The Chassis for Robot from 5" RRC04A is a Chassis from Acrylic of 1/8" that provides a base for our 42x19mm gear motors, brackets and wheels. The Chassis of the Robot has many mounting holes that allow you to mount a variety of components on it. With a diameter of just five inches, this Chassis made of Acrylic is great for building robots capable of navigating tight spaces.

The Motor Driver de Stepper DRV8825 is a Module Indicated for Control of Stepper Motors of 3D Printers and CNC Equipment, With Current Regulation by Trimpot. The Module Accepts Power between 8.2V and 45V and can supply up to 1.5A per Phase, Supporting Micro Resolution up to 1/32 Steps. It has current and temperature overload protection.

Encoder for Pololu Wheel 42x19mm

Pololu Wheel 60×8mm Pair - White

H-bridge Stepper Motor Dual DC Motor Driver L9110S

Pololu Aluminum Scooter Wheel Adapter for 4mm Shaft

Bracket Pair for Sharp GP2Y0A02, GP2Y0A21.

This acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components.

Micro Metal Gearmotor 0.9A - 50:1

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors.

Tamiya’s steel-ball caster is a good way to give a “third wheel” to a small robot powered by a differential drive. The kit comes with enough parts to make two casters, either 25 mm or 35 mm in height.

Motor Speed Controller 12-40V 10A

This compact carrier board makes it easy to integrate a Sharp GP2Y0A60SZLF analog distance sensor (not included) into your project by providing all of the required external components and a 0.1?-pitch, four-pin interface to the sensor. This version of the carrier board is configured for 3V mode.

Photoelectric sensor tracking module for five-channel infrared detection tracking.

Which wheels should your robot car use? How about the Wheel of Mecanum! The Mecanum Wheel is an omnidirectional wheel design for a land vehicle to move in any direction, such as going straight, obliquely, horizontally, line S and turning at any angle with zero radius.

This Replacement Ball 3pi Robot with 1/2″ Plastic Ball can be used as a 3pi Robot Spare Part or as a General Purpose Ball. When mounted through a Hole in a Chassis using our 32 × 7mm Metal Gearmotors and Wheels, as in the 3pi, this Ball is the Right Height to keep the Chassis Level.

The Pack of 4 Black Wheels is a product specially designed for the construction of robots stands.

Do you find the world of robotics interesting? It's very easy to create a robot! With this 2WD Round Chassis for Robot Cart, a microcontroller (Arduino), some sensors and programming you will be able to develop the robot of your dreams!