(SEM IVA 3.10€)
This is an os card for our RFID readers . The SparkFun L eid RFID Breakout converts the 2mm pins to the breadboard in a friendly 0.1 "headers. With this ability the ID-3LA, ID-12LA, and ID-20LA you can weld the reader directly to the header or use the 2 mm connectors
This is a card for our RFID readers . The SparkFun RFID Breakout Reader converts the 2mm pins to the breadboard in a friendly 0.1 "headers. With this ability the ID-3LA, ID-12LA, and ID-20LA you can weld the reader directly to the header or use the 2 mm connectors.
The card also works with the ID-20LA, but it is smaller at the edges. As said before each pin of the RFID reader was broken off, < strong> including: VCC, LEIA, D0, D1, FORM, TIR, PB, both ANTs, RES, and GND .
Documents:
• Schema;
• Eagle files;
• Video .
Includes:
• Adapter plate for RFID SparkFun Reader
Each Card pre-programmed with a unique identification number, printed on the card. The Identification Card is suitable for the 125KHZ Card Reader and the Reading Distance is 0cm to 10cm. Used in Identification, Financial Identification, Access Control Systems, Low Frequency Identification Cards and so on. Read-only, not HID card.
An RFID Reader with PIN Code , from Orno.
This is an os card for our RFID readers . The SparkFun L eid RFID Breakout converts the 2mm pins to the breadboard in a friendly 0.1 "headers. With this ability the ID-3LA, ID-12LA, and ID-20LA you can weld the reader directly to the header or use the 2 mm connectors
