The Smart Health Kit has the Sensor:Bit, Analog UV Sensor, PIR Sensor, MQ3 Alcohol Sensor, Servo and Etc, we can use it to develop projects such as UV Light Detection, a Posture Change Reminder, Alcohol Detector and much more, with which we can learn to program and maintain healthy lifestyle habits in a scientific way!

The Smart Agriculture Kit has IoT:bit, DS18B20 Temperature Sensor, Soil Moisture Sensor, Water Level Sensor, PIR Sensor, Servos and Etc, we can use it for build projects such as a smart insect repellent, an ecological greenhouse, an aquarium water level monitoring device and much more, from which we can learn about modern agriculture, program and explore more possibilities to apply technology in agriculture!

The Smart City Kit has the IoT:Bit, DHT11 Sensor, Soil Moisture Sensor, Water Level Sensor, Sonar:Bit, Servos and Etc, we can use it to build topics like smart parking, transport network and river level monitoring, we can use it to learn more about IoT!

Unlock your potential and get creative with code, electronics, science and engineering, with the BBC Micro:Bit Starter Pack anything is possible! This Micro:Bit V2 Kit contains everything you need to start using Micro:Bit right away. It consists of a BBC Micro:Bit V2, a USB Cable, a Battery Holder with 2 AAA Batteries. The USB Cable allows you to connect your Micro:Bit to a computer. A Batteries allow you to power your BBC Micro:Bit after disconnecting it from the USB.

Make a small Video Display with this Bicolor 8x8 LED Matrix. At just 1.2" on a side, it's pretty visible, but not enough to not plug into a breadboard! Each grid has two LEDs inside so it can display red, green, yellow, or multiplexed. This Matrix is bright, Beautiful and modern with beautiful diffused square lens for a stunning look. There are 24 pins on the side, 12 on each, with 0.1" spacing so you can easily connect it to a breadboard with a line on each side for wiring above.

The Iot:Bit is a Board from Expansion based on IoT for Micro:Bit. It uses the ESP8266 as a Board of WiFi Expansion and serial port to communicate with the Micro:Bit. It also extended all available IO Ports of Micro:Bit which is led by GVS and can extend various 3V E-Blocks like LED, Photosensitive and Servo by using it. At the same time, the Iot:Bit with a built-in buzzer for external sound and a built-in RTC clock for timing without power supply. Let's create your own IoT by MakeCode!

A Module with GPRS Antenna, operation Wireless and SIM Card.

The Cutebot is a rear-wheel drive smart car powered by high-speed twin engines. There is a lot of equipment on board in the Cutebot, including ultrasonic sensor and distance sensor, two RGB LED headlamps and lamps at the bottom, two line tracking probes, an active buzzer as the horn and so on. ! Let's drive your first smart car!

A ESP32 NodeMcu WiFi CP2102 Module with Built-in Antenna, MicroUSB Connector, Bluetooth BLE 4.2, Analog Digital Converter, GPIO with PWM Functions, 12C, SPI, Etc and Supports Remote Firmware Upgrade.

This board is the combination of 3 extremely interesting products: a ESP32 Module with WiFi and Bluetooth, a oLED Display and a battery charging and charging system Lithium-Ion 18650.

Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.

The WT32-SC01 is a Board from Development based on the ESP32 with 3.5 touch screen inches (320x480 pixels), in color, which was recently launched by Wireless-Tag Technology Co. Ltd.

Joystick: Bit V2 is a Joystick based on Micro: Bit . Contains a 4-Way Joystick and 4 Undefined Buttons. Improves the Game Experience with its Integrated Buzzer and Vibration Engine. Joystick: Bit V2 can also be used as a Remote Control with a Good Look and Comfortable Feel.

The TPBot has the appearance of a toy and works as one, since it can be used very easily to follow lines, avoid obstacles or let it work alone (in entertainment mode). However, once the Micro: Bit is inserted, it becomes a super-complete and fully programmable smart car. It's great for working in a classroom, you can expand it with extra electronic modules and add Lego pieces.

RedBear DUO - Wi-Fi BLE IoT Board

A-Star 32U4 Prime SV

Arduino Wire with ATmega328

Wixel Programmable USB Wireless Module

A-Star 32U4 Prime LV microSD

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development boards like our very own SparkFun ESP8266 

Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your idea buds.
This Grove - Starter Kit for Arduino is upgraded version of our Grove Starter Kit plus. We included more frequently encountered modules in this kit to support your concept buildup.Optimize the internal slot structure, using technology to make our products inside plastic boxes more regularized, more protective.

The Atlas Scientific pH circuit designs currently available on the Internet are outdated and use a significant number of overly complex analog components. Atlas Scientific has reinvented and refined the pH circuit of the past to a more modern and simple to use model.

The Motor Driver Motor:Bit to Micro:Bit is compatible with the Micro:Bit and can activate the 2 Channel DC Motor at the same time. Its biggest feature is that we can perform the Motor Direction Control of a Channel with only one IO Port, which reduces the number of IO Ports used.

When you start the 2-channel motor, it is not possible to connect connectors such as LED matrix, IIC, SPI, etc. In addition, it can drive partial IO ports with GVS format. It is a Good Companion for DIY Smart Cars.

The Wukong Board with Lego Support for Micro:Bit is an Integrated Breakout Board with Multiple Functions based on Micro: Bit, which has a Size Similar to Micro: Bit with Buzzer, Servo and Motor Drivers. The board is designed to adapt perfectly to Lego. It takes 20 minutes to complete the upload.

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Ring:Bit Pack contains 200 LEGO compatible parts and the necessary electronics to assemble and program 6 different projects with Micro:Bit and Microsoft MakeCode.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

JoyC is a Joystick Module designed for the M5StickC. Supports two-handed operation. The main control chip is STM32F030F4, it uses the I2C communication protocol and the M5StickC host for data transmission. The joystick range is from 0 to 200, includes 12 RGB LEDs, and the bottom of the joystick contains 16340 battery holder.