Sensor:bit is a breakout board for Micro:Bit. The card increases the available I/O ports on Micro:Bit and transforms them into GVS. With this board, we can use various 3V modules like LED light, photocell, etc. The board has integrated a buzzer and an audio connector, which allows us to listen to music from the buzzer or with our headphones.

A Matte Blue Case in ABS to protect your Micro:Bit V2.

The Smart Health Kit has the Sensor:Bit, Analog UV Sensor, PIR Sensor, MQ3 Alcohol Sensor, Servo and Etc, we can use it to develop projects such as UV Light Detection, a Posture Change Reminder, Alcohol Detector and much more, with which we can learn to program and maintain healthy lifestyle habits in a scientific way!

The Smart Agriculture Kit has IoT:bit, DS18B20 Temperature Sensor, Soil Moisture Sensor, Water Level Sensor, PIR Sensor, Servos and Etc, we can use it for build projects such as a smart insect repellent, an ecological greenhouse, an aquarium water level monitoring device and much more, from which we can learn about modern agriculture, program and explore more possibilities to apply technology in agriculture!

The Smart City Kit has the IoT:Bit, DHT11 Sensor, Soil Moisture Sensor, Water Level Sensor, Sonar:Bit, Servos and Etc, we can use it to build topics like smart parking, transport network and river level monitoring, we can use it to learn more about IoT!

The Cutebot is a rear-wheel drive smart car powered by high-speed twin engines. There is a lot of equipment on board in the Cutebot, including ultrasonic sensor and distance sensor, two RGB LED headlamps and lamps at the bottom, two line tracking probes, an active buzzer as the horn and so on. ! Let's drive your first smart car!

The Micro:Bit Wonder Building Kit focuses on brick expansions with 20 designs available, and youcan build more designs. Equipped with several electronic sensors, such as the Line-Following Sensor, the Sonar:Bit and the Water Level Sensor, which enrich projects with more challenges and fun.

Based on Planet X sensors, the Nezha Inventor Kit is designed for the BBC Micro:Bit. It contains various sensors, ultrasonic sensor, collision sensor, line tracking sensor, etc., as well as more than 400 assembly parts. Make every child an inventor with the Nezha Inventor Kit!

The TPBot has the appearance of a toy and works as one, since it can be used very easily to follow lines, avoid obstacles or let it work alone (in entertainment mode). However, once the Micro: Bit is inserted, it becomes a super-complete and fully programmable smart car. It's great for working in a classroom, you can expand it with extra electronic modules and add Lego pieces.

The Motor Driver Motor:Bit to Micro:Bit is compatible with the Micro:Bit and can activate the 2 Channel DC Motor at the same time. Its biggest feature is that we can perform the Motor Direction Control of a Channel with only one IO Port, which reduces the number of IO Ports used.

When you start the 2-channel motor, it is not possible to connect connectors such as LED matrix, IIC, SPI, etc. In addition, it can drive partial IO ports with GVS format. It is a Good Companion for DIY Smart Cars.

The Wukong Board with Lego Support for Micro:Bit is an Integrated Breakout Board with Multiple Functions based on Micro: Bit, which has a Size Similar to Micro: Bit with Buzzer, Servo and Motor Drivers. The board is designed to adapt perfectly to Lego. It takes 20 minutes to complete the upload.

The Micro:Bit Adapter for Breadboard is based on Micro:Bit and can be connected directly to a Breadboard. Through this adapter, you can start several DIY creations. It is only compatible with the Micro:Bit.

The GeekServo Motor 9g 270 Degrees Compatible with Lego is composed of a DC Motor and Feedback Control Loop and generally PWM Controlled. There are basically 2 Types on the Market: The Limited Rotation Servo (Angle Control Focus) and Continuous Rotation Servo (Speed Control Focus).

The GeekServo Motor 9g Compatible with Lego contains protection against any excessive force with the "Jumping Over Teeth" protection. Can be Programmed by MakecodeN, JavaScript, microPythonN and C ++. The Engine is Compatible with Lego Accessories for many projects to be created!

The EF90D 360 Degree Servo Motor with Wheel and Tire is a kind of 360 Degree Analog Servo. It is Light and Portable, slightly larger than a 5 Cent Coin. It works with 3V voltage and it is possible to adjust the rotation speed of the servo, which can also be used to make small Robot Modules, Mechanical Arm Modules and Smart Car Modules.

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Ring:Bit Pack contains 200 LEGO compatible parts and the necessary electronics to assemble and program 6 different projects with Micro:Bit and Microsoft MakeCode.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!