(SEM IVA 8.85€)
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn&rsquot know how? Well, here&rsquos how: The 12V solenoid controlled fluid valve.
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the ¾" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid. Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it’s actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve. A garden hose or other pressurized system should work just fine. Documents: - Datasheet ROB-10456
Anonymous customer published the 12/04/2022 following an order made on 03/04/2022
Excelente
2WD 2+1 Wheels Robot Chassis Kit for the Arduino platform. Ideal for those who want to develop a remote controlled robot car, line follower robot, fire truck, etc.
Submersible Water Pump with 12V 3W 200L/H.
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn&rsquot know how? Well, here&rsquos how: The 12V solenoid controlled fluid valve.
