This site uses cookies to improve your experience. By navigating this site, you consent to the use of cookies. Learn more about our cookies.

IoT Development Kit (PSRAM 2.0) - M5Stack Fire

€68.90

(SEM IVA 56.02€)

local_shippingPORTES DE ENVIO GRÁTIS

M5Stack
c0733ms

The M5Stack FIRE Kit is an update to the Gray kits, except for the 9-axis IMU sensor. Provides more hardware features: 16M Flash + 4M PSRAM, enhanced BRISA Base (MSGO Base and M5GO CHG Base), larger battery, etc.

Volume discounts

Quantity Price You Save
3 €68.21 Up to €2.07
5 €66.83 Up to €10.34
10 €65.46 Up to €34.45
Quantity
In Stock

IoT Development Kit (PSRAM 2.0) - M5Stack Fire

The M5Stack FIRE Kit is an update to the Gray kits, except for the 9-axis IMU sensor. Provides more hardware features: 16M Flash + 4M PSRAM, enhanced BRISA Base (MSGO Base and M5GO CHG Base), larger battery, etc.

With an IMU posture sensor, you can include posture detection in your work: accelerated speed, angulation and trajectory detection. You can create relative products, like sports data collector, 3D remote gesture controller and more.

FIRE is an MS Core device. Its modular, stackable and portable device is powered by an ESP-32 core, making it open source, low cost, full featured and easy for developers to handle new product development at all stages, including circuit design, PCB design, software, mold design and production.

MSsStack Fire comes with three separable parts. The upper part, like the Basic and the Gray Kit, has all kinds of processors, chips, scokets, 2.4G antenna etc., such as ESP32, power management IC, LCD screen and some other interface components. The middle part, called MSGO base (link), provides lithium battery, M-BUS socket (link), LED bar and two more GROVE ports. The lower part is a loading table, which can be connected to the MSGO base via POGO pins.


Characteristics:

• 5V DC power supply;
• USB Type C;
• Based on ESP32;
• 16 MByte flash + 520K RAM + 4M PSRAM;
• SH200Q + BMM150;
• Speaker, 3 Buttons, LCD (320x240), 1 Reset;
• 2.4G antenna: Proant 440;
• TF card slot (maximum size of 16G);
• Battery socket and 600mAh Lipo battery;
• Extensible pins and holes;
• Grove Port;
• M-Bus sockets and pins;
• UIFlow Development Platform, MicroPython, Arduino.


ESP32 Features:

• 240MHz Tensilica Dual Core LX6 Microcontroller with 600DMIPS;
• 520KB Integrated SRAM;
• WiFi Transceiver 802.11b / g / n HT40 WiFi Integrated, Base Band, Battery and LWIP;
• Integrated Dual Mode Bluetooth (Classic and BLE);
• Sensor Hall;
• 10x Capative Touch Interface;
• 32kHz Crystal Oscillator;
• PWM / Timer Input / Output Available on All GPIO Pins;
• SDIO Master / Slave 50MHz;
• Support for the SD Card Interface.


The Kit Includes:

• 1x M5Stack Fire Controller;
• 1x M5GO Base (Compatible with LEGO);
• 1x CHG M5SGO base;
• 10x Dupont Female-Male;
• USB Type C cable;
• User manual.


Block Programming with UIFlow, Documentation Available at https://docs.m5stack.com

No customer reviews for the moment.

Related Products

ESP32 IOT Universal Experimental Laboratory Kit - M5Stack

0 Review(s) 
In Stock
Price €224.77 Regular price €244.77

This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.

Fingerprint Unit (FPC1020A) - M5Stack Finger

0 Review(s) 
In Stock
Price €33.20

Finger is a fingerprint sensor that makes fingerprint verification super simple.

The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.

This unit communicates with the M5Core by UART protocol connected via PORTC.

Mini IoT Development Kit M5StickC ESP32-PICO with Bracelet -...

0 Review(s) 
In Stock
Price €29.90

The M5Stick-C is a Mini M5Stack, powered by ESP32, It is a portable IoT development board, easy to use and open source.

What can this do? This small block is able to realize your idea, illuminate your creativity and help with the prototyping of the IoT in a very short time. This takes away many of the pains of the development process.

Mini Fan Unit - M5Stack Fan

0 Review(s) 
In Stock
Price €6.80

This module is designed with an N20 Engine and includes small propellers. This N20 motor has a supply voltage of 5V. And it has a rotation speed of 8800RPM.

Rfid Unit (MFRC522) - M5Stack Rdif

0 Review(s) 
There are not enough products in stock
Price €15.99

The MFRC522 operates in the frequency range of 13.56 MHz and uses the principle of modulation and demodulation to interact with the RF proximity card. This unit can perform the function of the card reading and writing device, to identify and record various information on the card, to encode and authorize an RF card.

10K Potentiometer Unit - M5Stack Angle

0 Review(s) 
In Stock
Price €4.95

Angle is a 10K potentiometer that can be used for continuous control, such as volume, brightness or engine speed. A potentiometer is a manually adjustable variable resistance with three terminals. Two terminals are connected to a resistive element, the third terminal is connected to an adjustable cleaner. The position of the wiper determines the output voltage. The output voltage is captured and converted by AD in ESP32 on portB.

LTE Module (M8321) - M5Stack LTE

0 Review(s) 
In Stock
Price €79.95

This is a wireless communication module, integrated with the M8321 NB-IoT module, which provides TD-LTE / FDD-LTE / WCDMA / TD-SCDMA / GSM / GPRS / EDGE frequency band and LCC + LGA package type. It integrated abundant Internet protocols, standard field interface and functions, supported WindowsXP, Windows7, Windows8, Windows10, Linux and Android USB driver.

In the layout of the LTE-4G module, more hardware resources were added, reserved lanes for speakers, 3 LEDs, USB interface, double antenna allowed.

Mini Relay Module 3A - M5Stack Relay

0 Review(s) 
In Stock
Price €5.90

Relay, as its name implies, implements a relay function. The relay can be used as a switch operated electrically through the coil to mechanically operate a switch, where it is sometimes necessary to control a circuit of another voltage and current load through a separate low power signal, such as a digital signal emitted by a mircoprocessor. Up to 30V DC and 220V AC.

I2C Joystick Unit (MEGA328P) - M5Stack Joystick

0 Review(s) 
In Stock
Price €9.90

The Joystick is very similar to the 'analog' joystick on PS2 controllers (PlayStation 2). The X and Y axes are two 10k potentiometers that control 2D movement, generating analog signals. The joystick also has a button that can be used for special applications, so the entire unit can emit X-Y movement signals in both directions and in the Z direction.

This unit communicates with the MSCore via the GROVE A interface. The I2C address is 0x52, Reading the data transferred from the Joystick, you can obtain the movement information from the Joystick.

Coding Module MEGA328P with 500mAh Battery - M5Stack Plus

0 Review(s) 
In Stock
Price €22.14

The Plus is an enhanced M5 Module that comes with Lipo battery (500mAh), gear potentiometer, IR transmitter, port PORT B (GPIO port) extended, port C (UART port) of the MS core and a microphone solder block. Equipped with MEGA328, it can be a major upgrade of hardware resources, adding PLUS to your work.

Communication Protocol: IIC (0x62).

Basic IoT Starter Kit with 6 Modules - M5Stack M5Go

0 Review(s) 
In Stock
Price €104.55

It is a Kit with 6 Internal M5 Units (ENV, IR, RGB, PIR, ANGLE, HUB). Like another M5Stack Development Kit, MSGO is powered by ESP32.

Every M5stack development kit can be programmed using Arduino IDE, WebIDE UlFlow, Micropython and Blockly, simplifying the development process for those who require a joint hardware and software solution, M5stack not only has wide-reaching IoT applications on industry, at home, but also enables students to learn to code.

Infrared Distance Sensor Unit - M5Stack IR

0 Review(s) 
In Stock
Price €4.95

IR is an Infrared Photoelectric Sensor. The infrared remote control is widely used in consumer electronics; it can be used to operate devices such as televisions, DVD players or other household appliances within a short distance. Since this unit comes with a transmitter and receiver, you can practice not only IR encoding, but also IR decoding.

New Order