Mini IoT Development Kit M5StickC Esp32-Pico - M5Stack
The M5Stick-C is an ESP5 powered M5Stack mini. It's a portable, easy-to-use, open source IoT development board.
(SEM IVA 83.45€)
local_shippingPORTES DE ENVIO GRÁTIS
It is a Kit with 6 Internal M5 Units (ENV, IR, RGB, PIR, ANGLE, HUB). Like another M5Stack Development Kit, MSGO is powered by ESP32.
Every M5stack development kit can be programmed using Arduino IDE, WebIDE UlFlow, Micropython and Blockly, simplifying the development process for those who require a joint hardware and software solution, M5stack not only has wide-reaching IoT applications on industry, at home, but also enables students to learn to code.
It is a Kit with 6 Internal M5 Units (ENV, IR, RGB, PIR, ANGLE, HUB). Like another M5Stack Development Kit, MSGO is powered by ESP32.
Every M5stack development kit can be programmed using Arduino IDE, WebIDE UlFlow, Micropython and Blockly, simplifying the development process for those who require a joint hardware and software solution, M5stack not only has wide-reaching IoT applications on industry, at home, but also enables students to learn to code.
This M5GO kit was specifically designed for teaching STEM. The package includes 1 MSGO controller + 6 M5GO units + many accessories. This set, together with the Blockly program platform, allows students to explore the world of engineering, making their own IoT product and implementing brilliant ideas in real life.
Characteristics:
• 5V DC power supply;
• USB Type C;
• Based on ESP32;
• 16 MByte flash + 520K RAM;
• MPU9250;
• Speaker, 3 Buttons, LCD (320x240), 1 Reset;
• 2.4G antenna: Proant 440;
• TF card slot (maximum size of 16G);
• Battery socket and 600mAh Lipo battery;
• Extensible pins and holes;
• Grove Port;
• M-Bus sockets and pins;
• UIFlow Development Platform, MicroPython, Arduino.
ESP32 Features:
• 240MHz Tensilica Dual Core LX6 Microcontroller with 600DMIPS;
• 520KB Integrated SRAM;
• WiFi Transceiver 802.11b / g / n HT40 WiFi Integrated, Base Band, Battery and LWIP;
• Integrated Dual Mode Bluetooth (Classic and BLE);
• Sensor Hall;
• 10x Capative Touch Interface;
• 32kHz Crystal Oscillator;
• PWM / Timer Input / Output Available on All GPIO Pins;
• SDIO Master / Ointment S0MHz;
• Support for the SD Card Interface.
The Kit Includes:
• 1x White M5Core Controller;
• 1x M5GO Base (Compatible with LEGO);
• 6x Units (ENV, IR, RGB, PIR, ANGLE, HUB);
• 4x LEGO Connectors and Bricks;
• 3x GROVE cable;
• USB Type C cable;
• User manual.
This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.
Finger is a fingerprint sensor that makes fingerprint verification super simple.
The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.
This unit communicates with the M5Core by UART protocol connected via PORTC.
Angle is a 10K potentiometer that can be used for continuous control, such as volume, brightness or engine speed. A potentiometer is a manually adjustable variable resistance with three terminals. Two terminals are connected to a resistive element, the third terminal is connected to an adjustable cleaner. The position of the wiper determines the output voltage. The output voltage is captured and converted by AD in ESP32 on portB.
Color is a Light to Digital Color Converter with IR Filter. The TCS3472 Device provides a digital red, green, blue (RGB) return and sharp light detection values. An infrared blocking filter, integrated in the chip and located in the color-sensing photodiodes, minimizes the infrared spectral component of the received light and allows color measurements to be made accurately.
This unit communicates with the M5Core through the Grove (I2C) port. The address is 0x29.