Client support
Email: info@electrofun.pt
(SEM IVA 11.43€)
A device for taking display in metric units (kWh) is a direct measure of active energy in a single phase. A special electronic circuit under the influence of current flow and applied voltage generates impulses proportional to the energy absorbed. The power consumption phase is signaled by a flashing LED. The number of pulses is converted to the energy input, and its value is indicated by the LCD display (5 + 2).
A device for taking display in metric units (kWh) is a direct measure of active energy in a single phase. A special electronic circuit under the influence of current flow and applied voltage generates impulses proportional to the energy absorbed. The power consumption phase is signaled by a flashing LED. The number of pulses is converted to the energy input, and its value is indicated by the LCD display (5 + 2).
Specifications:
• Power: 230V, 50Hz;
• Current Base: 5A;
• Max. Current: 40A;
• Current min. 0.25A;
• Pulse frequency of 1000 pulses / kWh;
• Class B accuracy;
• DIN TH-35mm assembly;
• Output pulse: 12 ~ 27V;
• Pulse Current = 27mA = 90ms;
• Energy measurement is performed according to the standards EN50470-1: 2006, EN50470-3: 2006 MID Directive 2014/32 / UE;
• Type: Single-phase;
• Ports: No;
• Communication protocol: None;
• Voltage: 230V ~ 50Hz;
• Base Current (Ib): 5A;
• Maximum Current (Imax): 40A;
• Minimum Current (Lmin): 0.25A;
• Pulse frequency: 1,000 imp / kWh;
• Accuracy class: B;
• Compliance with MID (2014/32 / UE): Yes;
• Display: 5 + 2;
• Output pulse: Yes;
• Number of Modules: 1;
• Protection: IP51;
• Dimensions: 18x110x60mm.
Includes:
• 1x Digital Energy Cost Meter for DIN Rail 40A with MID (Single Phase) - Orno.
Push Button DS-213, one Switch with Auto-Reset.