Client support
Email: info@electrofun.pt
(SEM IVA 43.89€)
local_shippingPORTES DE ENVIO GRÁTIS
The DSO Shell has a bandwitch similar to the DSO138, although it contains significant improvements in structure, mechanics and operation. The Display and MCU are now mounted on the same board to avoid the use of pin-headers between boards. Feedback from DSO138 users showed that welding on pin heads is often problematic for many beginners.
The DSO Shell has a bandwitch similar to the DSO138, although it contains significant improvements in structure, mechanics and operation. The Display and MCU are now mounted on the same board to avoid the use of pin-headers between boards. Feedback from DSO138 users showed that welding on pin heads is often problematic for many beginners.
The analog channel is placed on a separate board that contains most of the parts installed by the user. This brings about a better separation between analog and digital circuits. Without the analog part, the motherboard is actually a general purpose control board that can be used in many other applications. The motherboard is fully installed (except for some retaining components) and tested at the factory before packaging.
The DSO Shell comes with a complete enclosure. The front panel and the upper / lower brackets are flexible for easy modification by the user. The rotary encoder was added. This makes adjusting the parameters much faster and easier. The sensitivity of the DSO Shell has been extended in both directions and is larger and wider than the DSO138. It reaches 5mV / Div - 20V / Div while the DSO138 is only 10mV / Div - 5V / Div.
The DSO Shell works with a 9V power supply (do not use a supply voltage greater than 10V). Users need to prepare their own power supply, as it is not included in the kits. The motherboard power connector accepts a standard 5.5mm / 2.1mm DC plug. An alternate 2-pin connector is also provided for your convenience for connecting to different power sources.
Specifications:
• Channel Number: 1;
• Analog Bandwidth: 0-200KHz;
• Sensitivity: 5mV / Div - 20V / Div;
• Sensitivity Error: & lt; 5%;
• Resolution: 12 Bits;
• Input Impedance: 1M ohm;
• Maximum Input Voltage: 50Vpk;
• Coupling: DC, AC, GND;
• Max. Real Time Sampling Rate: 1Msps;
• Time Base: 10us / Div - 500s / Div;
• Record Length: 1024;
• Modes Trigger: Automatic, Normal, Single;
• Trigger Types: Rising / Descending Edge;
• Trigger Position: 1/2 of Fixed Buffer Size;
• 2-TFT LCD , 4 Inches Color with 320x240 Resolution;
• Power Supply: 9V DC (Make sure the Power Supply is 9V, Less or Greater than 9V Will Cause Problems!);
• Power Current Power: 120mA @ 9V;
• Dimension: 115x75x22mm;
• Weight: 100g (Not including cables and power supply).
Links:
• Firmware ;
• User's Manual ;
• Main Board - Layout ;
• Analog Board - Layout ;
• How to Use the DSO150 Library ;
• Source Codes ;
• FAQ, Tips and Troubleshooting .
Includes:
• 1x Digital Oscilloscope Module 9V DSO-SHELL DSO150.
Amperometric Clamp Digital AC/DC with 600v.
One Set 2 X-Acts and 6 Blades, from ProsKit.