A Didactic Kit which includes 1 Lamp, Battery and 1 Switch, by EDM.

This Kit contains mechanical parts and electronic modules to start exploring the world of robots, can be used to build a robot tank or a three wheel robot car. With the following electronic modules: Makeblock Orion controller (compatible with Arduino UNO), ultrasonic ranger sensor, IR remote controller and IR receiver, an IR control robot or an ultrasonic obstacle avoidance robot can be built. The Me series electronic modules are easy to use ​​for beginners.

A DIY Kit of a Adapter Board of the Power Supply of ATX Power, XH-M229.

Want to learn how to solder electronic devices? Then this is the ideal set for you! This starter set includes the tools and components you need to make two gadgets. Inside the storage box, you will find a soldering iron with a support, cutters and soldering tin. In addition, all components and parts of the gadgets.

This Kit integrates 10 Grove Modules and a Grove connection Shield on a single PCB board. All of these Modules and the Base Shield are already connected through the Wires on the PCB. This means that you only need to connect the Arduino Sensor Kit to the Arduino UNO or a Compatible Board (For example, SeeeduinoV4,2) and connect directly to a computer, then you can start programming and programming the Arduino with all sensors, actuators and OLED screens in the Arduino Sensor Kit.

Designed to facilitate the creation of IOT projects, the Arduino Oplà is based on a Arduino MKR WiFi 1010 , on which the Arduino wrapped in a plastic box. The kit includes a round OLED Display, along with Five Touch Buttons and Multiple Sensors to Monitor Air Pressure, Humidity, Light Intensity and Temperature. However, Additional Sensors must be simple to connect, like a PIR Sensor, which the Arduino also groups.

One Kit 55 Pieces of Assembly for Aeromodelling Engines.

A series of Robot Kits for the future engineer. Assemble this Kit and find out how much fun Electronics, Mechanics and Hydraulics can be! Optional USB Interface Kit that connects our KSR10 Robotic Arm to a USB Port a personal computer compatible with Microsoft applications.

The 2WD mobile platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller . The robot comes as a kit that includes two drive motors, wheels (and rear caster), frame and all mounting hardware . The main structure and mechanical parts of a robot.

The Wonder Rugged Car by Elecfreaks! An Intelligent Car designed with Mecanum wheels, allowing smooth 360 degree movement in all directions! Omnidirectional movement, as well as compatibility with Lego's! The Wukong Plate inside the Kit has an Integrated Bell, 8-Way Servo Drive, Duel Motor Drive, 4 Rainbow LEDs, as well as 8 Blue LEDs.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

The Ring:Bit Pack contains 200 LEGO compatible parts and the necessary electronics to assemble and program 6 different projects with Micro:Bit and Microsoft MakeCode.

Important: Does not include the Micro:Bit Card! But don't worry, get the Micro:Bit Card here: Bit -> Click Here!

This is the Latest Version of the popular Simon Says Kit. Some changes have been made to the board that should make it easier than ever to create for a beginner! All components are Through-Hole, making this Kit a great option to start when learning to weld. When assembling this Kit, you will have the chance to solder a 28-pin Microprocessor, LEDs, Battery Clips and more.

PuppyC is a programmable four-legged robot base compatible with the M5StickC. It contains the STM32F030F4 Microcontroller, four 5G90 micro servos, a battery holder and an independent switch. The PuppyC base needs to be used in conjunction with the M5StickC controller. After programming StickC, it communicates with PuppyC through the I2C protocol to control the steering movement.

It is a Kit with 6 Internal M5 Units (ENV, IR, RGB, PIR, ANGLE, HUB). Like another M5Stack Development Kit, MSGO is powered by ESP32.

Every M5stack development kit can be programmed using Arduino IDE, WebIDE UlFlow, Micropython and Blockly, simplifying the development process for those who require a joint hardware and software solution, M5stack not only has wide-reaching IoT applications on industry, at home, but also enables students to learn to code.

The M5Stick-C is a Mini M5Stack, powered by ESP32, It is a portable IoT development board, easy to use and open source.

What can this do? This small block is able to realize your idea, illuminate your creativity and help with the prototyping of the IoT in a very short time. This takes away many of the pains of the development process.

The M5Stack FIRE Kit is an update to the Gray kits, except for the 9-axis IMU sensor. Provides more hardware features: 16M Flash + 4M PSRAM, enhanced BRISA Base (MSGO Base and M5GO CHG Base), larger battery, etc.

This is an IoT Experiences Kit, developed with MSStack, It is a complete learning table with ESP32 technology, which includes everything you can imagine in industrial IoT + application scenarios. You will be able to do experiments such as: robotic movements, the most used serial communication port (RS485 RS232), relay control, all different types of button control, RF reader, speaker, microphone etc ... all programmed through the kit M5Stack base. Programming can be done through Blockly (UIFlow), Arduino and Micropython.

This Smart Video Car is a great Kit to get started. We provide several necessary parts, instructions and codes, so that you can assemble them yourself, with the help of the user guide, and thus enjoy the fun of doing it! The car control can be performed on a PC with a Linux system.

In this Kit, the MJPG-Streamer is applied to capture images and transmit video in real time. You can view the video through the web browser on any device. Firefox and Google Chrome are recommended.

Programmable console for games created with Microsoft MakeCode Arcade (also Python and Arduino). Portable (Small) and Incredible Performance. Learn to program from the age of 8 in the funniest way: creating your own Arcade Games!

Kit MK139 On/Off Clap Switch. Make your Home Lights ON and OFF with just a simple handshake. Ideal for Seniors or Bedding People, Great Noise Immunity.

The Official Raspberry Pi Mouse has three buttons that activate high quality micro switches. Place the mouse on a flat and stable surface when using it. The mouse optically detects movement on the surface on which it is placed. On surfaces without these features, such as table tops or acrylic, the mouse cannot detect movement. When working on such a surface, place the mouse on a mat.

The Raspberry Pi 4 Desktop Kit comes with: Raspberry Pi 4 Model B 4GB, US Keyboard and Raspberry Pi Mouse, 2 Micro HDMI to Sm Standard HDMI Cables, Official White/Red Box, Raspberry Pi 15.3W USB-C Power Supply, Official Raspberry Pi Beginner's Guide (English Language), 16GB MicroSD card with NOOBS Raspbian.

Starter Education Kit with Easy-Connect Arduino Board Keyestudio and 21 Sensors is a Very Simple Set designed for both Electronics Professionals and Curious People Who Want to Begin Experimenting.

The funniest welding initiation ever! This Learn to Solder Kit Elenco is easy for anyone who wants to start welding.

If you've never soldered before but want to explore the world of robotics and electronics, this kit is for you! A Soldering Iron, Solder and Diagonal Cutters are included in this Very Complete Kit. Flashing LEDs and a Siren tell you when you built your Circuit Correctly. A 9V battery is required but not included.

With this Educational Kit, you will be able to assemble a Elevator, with Platform and Command included!

With this Educational Kit, you can assemble a Drawing Plotter, with Plate and Arm included!