Acrylic Robotic Arm Kit For Arduino
Are you familiar with Arduino? Do you like robotic arms? This kit is your best ally! Discover all the potential of this arm, controlled by 4 servo motors.
Are you familiar with Arduino? Do you like robotic arms? This kit is your best ally! Discover all the potential of this arm, controlled by 4 servo motors.
The Sensor of Image Charmed Labs Pixy 2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, Pixy2 can learn to detect objects, just by pressing a button. In addition, Pixy2 has new algorithms that detect and track lines for use with line following robots. The new algorithms can also detect intersections and "traffic signs". Traffic signs can tell your robot what to do, such as turning left, turning right, slowing down, etc.
The Rotary Encoders are similar to Potentiometers, however, as they have no physical limits, they can run indefinitely. However, the similarity to a potentiometer is only physical, instead of having a variable resistance, in this type of Encoder we have an impulse output with 20 impulses per turn. In addition to the impulse output, it also has a push button function with two dedicated pins that close when we press the Encoder shaft.
An Educational Kit with Arduino and about 30 Modules and Components, ideal for an introduction to electronics.
A Starter Kit Educational DIY Smart Home with the Arduino UNO R3, in a Component Box with a Protective Cover, with a Sensor of PIR Movements, a Bluetooth V4.0 Module, a Water Sensor, a Relay Module, a Humidity Sensor, an LCD1602 Display, even a Screwdriver, a Set that in total consists of about 110 pieces.
This Module of Switch Reed uses a Small Device called a Leaf Switch. When the Device is Exposed to a Magnetic Field, the Two Ferrous Materials within the Switch are joined together and the Switch closes. When the Magnetic Field is Removed, the Switch Opens.
The Motor Driver de Stepper DRV8825 is a Module Indicated for Control of Stepper Motors of 3D Printers and CNC Equipment, With Current Regulation by Trimpot. The Module Accepts Power between 8.2V and 45V and can supply up to 1.5A per Phase, Supporting Micro Resolution up to 1/32 Steps. It has current and temperature overload protection.
With this Adapter Board the standard 10PIN AVRISP USBASP STK500 can be used to interface with the standard 6PIN interface converter. AVR MCU development board can be used to download interface converter. The development board can be used for the ISP interface converter.
This Module is a Rotary Incremental Encoder. It encodes the shaft rotation signal and outputs the signal by electronic pulse. The Grove –Encoder is a module of the Grove series and has a standard Grove interface. When you need to add a knob to your project, for example a volume knob for a speaker, a selection panel or a digital input, this should be your first choice.
The HC-12 433MHz Transceiver is a wireless communication Module, which is based on the RF SI4463 chip, has a built-in microcontroller and can be configured by AT commands, the maximum output power is 100mW (20dBm) and the receiver sensitivity differs from: 117dBm to -100dBm, depending on the transmission speed. Accepts 3.2V - 5.5V and can be used with 3.3V and 5V UART voltage devices.
A Module with GPRS Antenna, operation Wireless and SIM Card.
A ESP32 NodeMcu WiFi CP2102 Module with Built-in Antenna, MicroUSB Connector, Bluetooth BLE 4.2, Analog Digital Converter, GPIO with PWM Functions, 12C, SPI, Etc and Supports Remote Firmware Upgrade.
This board is the combination of 3 extremely interesting products: a ESP32 Module with WiFi and Bluetooth, a oLED Display and a battery charging and charging system Lithium-Ion 18650.
The ESP32-CAM is a WIFI + Bluetooth Development Card based on the ESP32 Chip, with the additional possibility of using a camera. It is ideal for a variety of loT applications.
Now the ESP8266 D1 Mini v3 is no longer alone! If you like WiFi communication, especially with ESP8266 chips, you can't miss this kit that includes several modules such as sensors, button, LED, Display, Relay, protoboard, among others. And you couldn't miss the respective ESP8266 D1 Mini v3 to be able to program in an Arduino environment and develop your wireless and IoT projects.
The WT32-SC01 is a Board from Development based on the ESP32 with 3.5 touch screen inches (320x480 pixels), in color, which was recently launched by Wireless-Tag Technology Co. Ltd.
The imported PL2303HX controller can stabilize the flash at high speed. With a 500mA auto-recovery fuse for protection and two data transmission indicators that can monitor the data transfer status in real time. The entire board is coated with a high-quality transparent heat-shrinkable layer, rendering the PCB in a state of isolation from the outside, so that the board is not burned. Electrostatic package, ensures that the plate will not be damaged before use. Supports WIN7 system.
This ESP8285 ESP M2 Module provides easy-to-use WiFi for any UART port and is compatible with the HC-06 Bluetooth modules. If your project uses Bluetooth, it is very easy to convert it to WiFi. Using the integrated web interface, WIFI-UART communication can be configured for TCP or UDP sockets on any port.
Solid State Relay - 8 Channels
The motor shield is based on the L298 , it is a double complete bridge driver designed to drive inductive loads, such as relays, solenoids, DC and stepper motors.
Uses the NTC Thermistor Sensor, Good Sensitivity. The Clean Waveform of the Comparator Output Signal is Good, Driving Capacity.
LDR Light Sensor with Relay
Imagine a Arduino Shield that can be configured to be an LCD, GPS, Wifi, or any Shield you can imagine!
An Controller Module of XH-M603 Charge, very easy to use, learn more about it here at ElectroFun!
The KY039 Infrared Pulsation Sensor is a small, inexpensive plate used to measure the electrical activity of the heart to enable heart rate / pulse checking in different parts of the human body. The data presented by the Sensor is useful for formulating exercise routines or even for studying and verifying heart activity levels.
The Arduino WTV020-SD MP3 Module is a voice recording module with 1GB SD Card storage capacity. You can upload WAV and AD4 format files that conform to FAT formatting. It supports 6KHz to 32KHz, being 36KHz for AD4 files and 6-16KHz for voice sampling rate (Audio Sampling).
Header Socket with 10-pin female ideal for PCB's or Arduino.