(SEM IVA 11.78€)
MicroSD card breakout board
Specifications:
• It's not just a simple breakout card, this microSD adapter goes further - designed to be easy to use.
• The onboard 5v- & gt; 3v provides 150mA for power-consuming boards
• Level switching 3v means you can easily use it on 3v or 5v systems
• Uses a suitable level switching chip, not resistors: less problems and faster read / write access
• Use 3 or 4 digital pins to read and write 2 Gb + storage!
• Activity LED lights up when the SD card is being read or written < br /> • Four mounting holes # 2
• Push-push socket with card slightly over the edge of the PCB for easy insertion and removal
• Comes with 0.1 "header (no connected) so you can put it on a breadboard or use wires - your choice
• Tested and assembled here at the Adafruit factory
• Works great with Arduino, with tons of code examples and wiring diagrams
• Dimensions: 31.8x25.3x3.75mm
• Weight: 3.4g
Includes:
• 1x MicroSD Breakout Card
Finger is a fingerprint sensor that makes fingerprint verification super simple.
The Uart protocol, compact size and ultra low power consumption make the use of MSStack series products very attractive. It performs fast fingerprint matching with the highest level of security and the ideal convenience of the user. You can program to set the level of comparison of the fingerprint recognition and the different security level. If you've ever thought about protecting your project with biometrics, don't forget to include this MSunit Finger.
This unit communicates with the M5Core by UART protocol connected via PORTC.
The imported PL2303HX controller can stabilize the flash at high speed. With a 500mA auto-recovery fuse for protection and two data transmission indicators that can monitor the data transfer status in real time. The entire board is coated with a high-quality transparent heat-shrinkable layer, rendering the PCB in a state of isolation from the outside, so that the board is not burned. Electrostatic package, ensures that the plate will not be damaged before use. Supports WIN7 system.
The Earth Unit is a Sensor for measuring Humidity in Soil or Similar Materials. The Soil Moisture Sensor is quite simple to use. The two large stake-type sensors act as probes for the sensor, acting together as a variable resistance. The higher the moisture in the soil, the better the conductivity between the two, so that the sensor results in less resistance and higher GIS output.
You can read the moisture in the soil through ADC. Within this unit, there is an extra potentiometer to change the measurement range.
MicroSD card breakout board
