(SEM IVA 26.70€)
This is the first Arduino board created in collaboration with Raspberry Pi. The Arduino Nano RP2040 Connect is based on the Raspberry Pi RP2040 chip and is the first card to combine this microcontroller together with additional sensors and wireless connectivity. This board has the Arduino Nano format and the same interfaces: USB, SPI, I2C, 12S, PIO, UART, PWM, digital / analog pins, but it has many more features. The Microcontroller is the Raspberry Pi RP2040 , a dual-core ARM Cortex MO + with a frequency of 133MHz, 264Kb of SRAM memory and 2Mb Flash.
This is the first Arduino board created in collaboration with Raspberry Pi. The Arduino Nano RP2040 Connect is based on the Raspberry Pi RP2040 chip and is the first card to combine this microcontroller together with additional sensors and wireless connectivity.
This board has the Arduino Nano format and the same interfaces: USB, SPI, I2C, 12S, PIO, UART, PWM, digital / analog pins, but it has many more features. The Microcontroller is the Raspberry Pi RP2040 , a dual-core ARM Cortex MO + with a frequency of 133MHz, 264Kb of SRAM memory and 2Mb Flash.
It has 16MB of extra Flash memory, outside the microcontroller, to be able to create larger programs and / or save more data. The programmable I/O pins have functions that surpass many boards larger than this: 22 digital signals, 20 with PWM and 8 with analog signal acquisition.
A microphone and a 6-axis motion sensor add a level of possibilities that is almost impossible to find on a board of this size. But what's really exciting are the on-board WiFi and Bluetooth connectivity options. The extremely popular U-blox module NINA-W102, and highly adaptable, is included to make you a true IoT champion.
It also means that you can harness the power of the cloud, with full compatibility with the Arduino Cloud. This card can be programmed through the Arduino IDE offline mode or in the Arduino IDE Cloud online mode. Programming is done by connecting the card to a computer using a MicroUSB cable or wirelessly using Arduino Cloud. The program upload to the Arduino Nano RP2040 Connect can be done remotely (over-the-air) which makes the development and installation of IoT application updates much more practical.
As it is based on a Raspberry Pi microcontroller, it also has full support for programming with MicroPython. The Nano RP2040 Connect comes with a free OpenMYV license for using computer vision algorithms.
Specifications:
• USB Supply Voltage: 5V (MicroUSB);
• VIN Supply Voltage: 4.5V to 21V;
• Operating Voltage: 3.3V.
• Microcontroller RP2040:
• ARM Cortex M0 Dual-Core 133MHz;
• 264 kB SRAM;
• 2Mb Flash;
• DMA Controller;
• Supports up to 16Mb of Flash Memory via QSPI Bus;
• Programmable IO (PIO) to Support External Peripherals;
• 4 Channel ADC with Internal Temperature Sensor, 0.5 MSa / s, 12 Bit Conversion;
• SWD debugging.
• Nina W102 WiFi / Bluetooth U-blox module:
• Dual Core Xtensa LX6 240 MHz 32 Bit;
• Memory in the 520 kB SARAM Chip;
• 448 kB ROM for Initialization and Main Functions;
• 16Mb Flash Memory for Code Storage, includes Hardware Encryption for Protection of Programs and Data;
• EFUSE of 1 kB for MAC Address, Module Configuration, Flash Encryption and Chip-ID;
• IEEE 802.11 b/g/n 2.4GHz WiFi;
• Bluetooth 4.2;
• Built-in Antenna (PIFA);
• 4x 12-Bit ADC;
• 3x I2C, SDIO, CAN, QSPI .
• Memory:
• AT25SF128A 16Mb NOR Flash;
• 532Mb / s QSPI Data Transfer;
• 100K Programming / Clear Cycles.
• 6-axis IMU sensor ST LSM6DSOXTR:
• 3D gyroscope: ± 2 / ± 4 / ± 8 / ± 16g Full scale;
• 3D accelerometer: ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000dps Full scale;
• Advanced Pedometer, Step Detector and Step Counter;
• Motion Detection and Rotation Detection;
• Standard Interruptions: Freefall, 6D / 4D Orientation Activation, Click, Double Click;
• Programmable Finite State Machine: Accelerometer, Gyroscope and External Sensors;
• Machine Learning Core;
• Built-in Temperature Sensor.
• MEMS ST MP34DT06JTR microphone:
• AOP = 122.5 dBSPL;
• Signal-to-Noise Ratio 64dB;
• Omnidirectional Sensitivity;
• Frequency -26dBFS ± 1dB.
• Led RGB:
• Common anode;
• Connected to the Nina W102 GPIO U-blox.
• ATECC608A Microchip Cryptographic Chip:
• Cryptographic Coprocessor with Secure Hardware Key Storage;
• I2C, SWI;
• SHA-256 and HMAC HASH Including Out-of-Chip Context Restoration / Saving;
• AES -128: Encryption / Decryption, Galois Field Multiply from GCM;
• High Quality Internal Random Number Generator NIST SP 800-90A / B / C;
• Secure Boot Support;
• Complete Validation of the ECDSA Code Signature, Hash / Optional Signature;
• Deactivation of the Optional Communication Key Before InitializationSecure Use;
• Message Encryption / Authentication to Prevent Attacks.
• I/O:
• 22x Digital Pins;
• 8x Pins with Analog Input;
• 20x Pins with PWM Output;
• 20x Pins with External Interruption;
• UART, SPI, I2C, I2S, PIO;
• MicroUSB.
• Operating Temperature: -20ºC to 80ºC;
• Dimensions: 45x18mm.
Includes:
• 1x Microcontroller Arduino Nano RP2040 Connect Original.
This is the first Arduino board created in collaboration with Raspberry Pi. The Arduino Nano RP2040 Connect is based on the Raspberry Pi RP2040 chip and is the first card to combine this microcontroller together with additional sensors and wireless connectivity. This board has the Arduino Nano format and the same interfaces: USB, SPI, I2C, 12S, PIO, UART, PWM, digital / analog pins, but it has many more features. The Microcontroller is the Raspberry Pi RP2040 , a dual-core ARM Cortex MO + with a frequency of 133MHz, 264Kb of SRAM memory and 2Mb Flash.
